Ronseal Direct to Metal Paint - Black Satin 750Ml
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Ronseal 15 Year Protection Direct to Metal Paint is designed for DIYers and professionals seeking a durable, low-prep finish for various metal surfaces. Its key benefit is the ability to apply directly to rust with minimal preparation, offering up to 15 years of protection. A potential caveat is the need for specific temperature and dry conditions during application for optimal results.
All features
| Colour | Black |
|---|---|
| Model Part Number | 39196 |
| Brand | Ronseal |
Extended Product Information
FAQs
Do I really need to apply two or three coats?
Yes, two coats are recommended for general coverage and protection. Three coats are advised for heavily rusted metal or when maximum durability and long-term protection (15 years) are desired.
Can I paint over old, existing paint?
Yes, if the existing paint is in good condition, lightly sand it and wipe clean. If it's flaking, remove the loose paint with a scraper, sandpaper, or wire brush, then clean and let it dry before applying Ronseal Direct to Metal Paint.
What is the best way to clean my brushes after use?
Clean brushes and rollers immediately after application with warm, soapy water. Rinse thoroughly.
Can this paint be used on galvanized metal?
While suitable for metal, it is recommended to prepare galvanized surfaces by degreasing and lightly abrading. Test on a small, inconspicuous area first if unsure.
How long does the paint last?
The paint is designed to provide up to 15 years of protection under normal conditions when applied correctly.
Can I apply this paint in cold weather?
No, for best results and proper drying, the ambient temperature must be above 10°C and the surface should be dry. Avoid painting if rain is expected.
What colours are available?
This product is available in a range of colours including Black, Grey, Green, and White, in various finishes like Matt, Satin, and Gloss.
Troubleshooting
Paint not adhering well
Ensure the surface was clean, dry, and free from grease. Re-check preparation steps, especially if applying to a very smooth or contaminated surface.
Uneven finish or brush marks visible
Ensure paint was stirred thoroughly. Apply in thin, even coats. Avoid overworking the paint. Ensure you are working within the recommended recoat times.
Paint remains tacky after drying time
Check environmental conditions; low temperatures or high humidity can slow drying. Ensure adequate ventilation. Avoid applying thick coats.
Rust appears shortly after painting
This may indicate insufficient preparation, particularly on heavily rusted areas, or inadequate coat coverage. Ensure loose rust was removed and at least two, preferably three, coats were applied.
Pros and Cons
Pros
- Significantly reduces preparation time by allowing application directly to rust.
- Offers excellent long-term durability and protection.
- Fast drying and showerproof times speed up project completion.
- Low odour makes it more user-friendly for indoor or enclosed spaces.
- Versatile application methods cater to different user preferences and project needs.
Cons
- Requires specific environmental conditions (above 10°C, dry day) for best results.
- Multiple coats (2-3) are recommended for optimal durability, increasing overall time.
- Cannot be emptied into drains or watercourses, requiring proper disposal.
- Bare metal preparation still involves some cleaning and wiping.
- Effectiveness on heavily degraded or pitted metal may vary.
Setup, Compatibility & Care
Preparation is key:
- Bare Metal: Remove loose rust and paint with a wire brush or 120-grit sandpaper. Wipe clean with a damp cloth.
- Previously Painted Metal (Good Condition): Lightly sand with 240-grit sandpaper. Wipe clean.
- Previously Painted Metal (Flaking): Remove flaking paint with sandpaper or a wire brush. Wipe clean and allow to dry.
Surface Requirements: Ensure all surfaces are clean, dry, and free from dirt, dust, and grease.
Application Conditions:
- Apply on a dry day.
- Temperature must be above 10°C.
- Avoid painting if rain is expected.
Application Methods:
- Stir paint thoroughly for 2-3 minutes before use.
- Use a paintbrush or roller for standard application.
- For spraying, dilute with approximately 10% water or follow sprayer manufacturer guidelines.
Coats: Apply two coats for general coverage, or three coats for rusty metal and maximum durability.
Drying Time: Touch dry in 30 minutes. Allow 2-4 hours between coats.
Cleaning: Clean brushes and rollers immediately after use with warm, soapy water.
Disposal: Do not empty leftover paint into drains or watercourses. Dispose of paint and containers responsibly according to local regulations.
Compatibility: Suitable for use on Metal, Wood, Cast Iron, and Aluminium.