Ronseal 15 Year Direct To Metal Paint - Satin - White - 750Ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Ronseal 15 Year Protection Direct to Metal Paint in Satin White is designed for DIYers and professionals seeking a durable, long-lasting finish for metal surfaces with minimal preparation. Its key benefit is the ability to apply directly to rust, eliminating the need for a primer and significantly reducing prep time. However, for the full 15-year protection, careful application and multiple coats are essential.
All features
| Colour | White |
|---|---|
| Model Part Number | 39199 |
| Brand | Ronseal |
Extended Product Information
FAQs
Do I really need to prime before using this paint?
No, the key feature of this paint is that it can be applied directly to rust, eliminating the need for a separate primer.
What kind of surfaces can I use this paint on?
It is suitable for most metal surfaces, including cast iron and aluminium, as well as wood.
How many coats of paint should I apply?
Two coats are recommended for good coverage and protection. For rusty metal or to achieve the ultimate 15-year durability, three coats are advised.
How long does it take for the paint to dry?
The paint is touch dry in 30 minutes and showerproof in 30 minutes. Allow 2 to 4 hours between coats.
Can I spray this paint?
Yes, you can spray the paint. It is recommended to dilute it with approximately 10% water for spray application.
How do I clean my brushes after use?
Clean brushes and rollers immediately after use with warm, soapy water.
What does the '15 Year Protection' guarantee?
The '15 Year Protection' refers to the expected lifespan of the coating under normal conditions when applied correctly with the recommended number of coats, providing a durable barrier against rust and corrosion.
Troubleshooting
Paint not adhering well
Ensure the surface was clean, dry, and free from grease before application. For best results, prepare rusty surfaces by removing loose material with a wire brush or sandpaper.
Uneven finish or brush marks
Stir paint thoroughly before and during use. Apply thin, even coats, avoiding overloading the brush or roller. For a smoother finish, consider diluting for spray application if appropriate for the surface.
Paint takes too long to dry
Ensure application occurs within the recommended temperature and humidity conditions. Avoid applying excessively thick coats, as this can prolong drying times.
Recoating taking longer than expected
Verify that the previous coat is properly dry to the touch and recoatable according to the specified time (2-4 hours). Environmental conditions can affect drying times.
Pros and Cons
Pros
- Significantly reduces preparation time by allowing direct application to rust.
- Offers a long-lasting finish with up to 15 years of protection.
- Quick drying and showerproof times speed up project completion.
- Low odour makes it more pleasant to use.
- Versatile application methods (brush, roller, spray) suit various user preferences.
Cons
- Requires multiple coats (three recommended for rusty metal) for maximum durability, increasing application time.
- Surface must still be clean, dry, and free from grease for optimal adhesion.
- Best results and 15-year protection depend on proper application technique and adherence to recoat times.
- While it adheres to wood, its primary benefit is for metal protection.
Setup, Compatibility & Care
Preparation is key for optimal performance.
- Clean the Surface: Ensure the metal surface is clean, dry, and free from dirt, dust, and grease.
- Address Rust and Old Paint: For bare metal, use a wire brush or 120-grit sandpaper to remove loose rust or paint. Wipe down with a damp cloth. For previously painted surfaces in good condition, a light sanding with 240-grit sandpaper is sufficient. If the old paint is flaking, remove it using sandpaper or a wire brush and wipe clean.
- Compatibility: This paint is suitable for use on metal (including cast iron and aluminium), and wood.
Application:
- Stir the paint thoroughly for 2-3 minutes before use.
- Apply using a good quality paintbrush or roller.
- For spraying, dilute the paint with approximately 10% water.
- Apply two coats for general use, and three coats for rusty metal or areas requiring maximum durability.
- Allow 2-4 hours between coats.
- The paint is touch dry in 30 minutes and showerproof in 30 minutes.
Care and Cleanup:
- Clean brushes and rollers immediately after use with warm, soapy water.
- Dispose of any unused paint responsibly according to local regulations.