Ronseal Direct to Metal Paint - Chilli Red Gloss - 250ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Ronseal Direct to Metal Paint in Chilli Red Gloss is for DIY enthusiasts and homeowners looking to protect and beautify metal surfaces without a primer. Its key benefit is the time-saving, direct-to-metal application that offers excellent adhesion and rust protection with a durable gloss finish. A potential caveat is the 250ml tin size, which may be insufficient for very large projects.
All features
| Colour | Red |
|---|---|
| Model Part Number | 39193 |
| Brand | Ronseal |
Extended Product Information
FAQs
Do I really need a primer with this paint?
No, this paint is specifically formulated for direct application to metal surfaces without the need for a primer, saving you time and effort.
What is the drying time for Ronseal Direct to Metal Paint?
Drying times can vary depending on temperature and humidity. Typically, it is touch dry in 1-2 hours and recoatable in 4 hours. Always refer to the product packaging for precise drying times.
Can I use this paint on galvanized surfaces?
It is not recommended for direct application on galvanized steel unless it has been specially treated or primed. Always test in an inconspicuous area or consult manufacturer advice for specific substrates.
How many coats should I apply?
For optimal protection and finish, two coats are generally recommended. Ensure you allow the first coat to dry before applying the second.
What is the coverage of a 250ml tin?
Coverage can vary depending on the surface porosity and application thickness. A 250ml tin typically covers approximately 1-1.5 square meters per coat. Check the product label for specific coverage details.
Is this paint suitable for high-heat surfaces like barbecues?
This paint is not designed for extremely high-heat applications. It is suitable for standard radiators but not for surfaces that reach temperatures exceeding 80°C, such as barbecues or exhausts.
How do I clean my brushes after use?
Clean your brushes and any spills immediately after use with water.
Troubleshooting
Paint is not adhering well
Ensure the metal surface was properly prepared, clean, dry, and free from grease or rust. Lightly abrading glossy surfaces before painting can also improve adhesion.
Uneven finish or brush marks visible
Stir the paint thoroughly before and during application. Apply in thin, even coats using a good quality brush or roller. Allow sufficient drying time between coats. Avoid applying in very humid or cold conditions.
Rust reappearing after painting
Ensure all loose rust was removed and the surface was clean before painting. For heavily rusted areas, consider a dedicated rust converter or primer before applying the topcoat, even though this product is direct-to-metal.
Paint is too thick or difficult to apply
Stir the paint well. If necessary and within manufacturer guidelines, a very small amount of water may be added, but this can affect durability. Ensure application conditions are suitable (not too cold or damp).
Pros and Cons
Pros
- Saves time with no primer required.
- Offers robust protection against rust and corrosion.
- Durable finish that adheres well to metal.
- Easy to apply for a smooth, professional look.
- Suitable for both indoor and outdoor metal items.
Cons
- 250ml tin may be too small for large surfaces.
- Gloss finish can highlight imperfections on the metal surface.
- Colour choice is limited to Chilli Red for this specific variant.
- May require multiple coats for optimal coverage and protection.
Setup, Compatibility & Care
Preparation: Ensure the metal surface is clean, dry, and free from loose paint, rust, and grease. Lightly abrade glossy surfaces with sandpaper and wipe clean. For heavily rusted areas, remove loose rust with a wire brush or sandpaper before application.
Application: Stir the paint thoroughly before use. Apply using a brush or roller. For best results, apply two coats, allowing adequate drying time between coats as per the manufacturer's instructions.
Compatibility: Suitable for direct application to most bare or previously painted metal surfaces, including iron, steel, and aluminium. Not recommended for use on galvanized steel unless properly primed or treated.
Care: Clean up spills and tools immediately after use with water. For ongoing maintenance, the painted surface can be wiped clean with a damp cloth. Avoid abrasive cleaners.