Ronseal Direct To Metal Paint - Gloss - Silver - 250Ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Ronseal Direct to Metal Paint is designed for individuals looking to quickly and efficiently protect metal surfaces with a durable, long-lasting finish. Its key benefit is the minimal preparation required, allowing application directly to rust without a primer, saving significant time. A potential caveat is that optimal 15-year protection relies on strictly following the instructions on the tin. This water-based paint offers robust protection for various metal and wood surfaces.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 39403 |
| Brand | Ronseal |
Extended Product Information
FAQs
Do I really need to apply primer?
No, Ronseal Direct to Metal Paint is formulated to be applied directly to rust without the need for a primer, saving you time and effort.
How long does it take to dry?
The paint is showerproof in 30 minutes under normal conditions. Always check the specific drying times on the product packaging as they can vary.
What surfaces can I use this paint on?
It is suitable for cast iron, aluminium, wood, and metal surfaces. Always ensure the surface is clean and dry before application.
How do I clean my brushes after use?
As this is a water-based paint, you can clean your brushes and equipment immediately after use with water.
What is the coverage rate?
The paint provides coverage of up to 8m² per litre, depending on the surface and application thickness.
Can I apply this paint over existing oil-based paint?
Yes, provided the existing oil-based paint is sound, well-adhered, and clean. Lightly abrading the surface may improve adhesion.
What is the expected lifespan of the protection?
When applied correctly and according to instructions, the paint provides up to 15 years of protection.
Troubleshooting
Paint not adhering well
Ensure the surface was clean, dry, and free from grease before application. Check that loose rust and paint were removed. Verify that the correct application conditions (temperature, humidity) were met.
Uneven finish or brush marks visible
Ensure the paint was stirred thoroughly. Apply using smooth, even strokes with a good quality brush or roller. Avoid overworking the paint. Apply a second coat if necessary to level the finish.
Paint remains tacky after extended drying time
This can occur in very humid or cold conditions. Ensure application was within the recommended temperature and humidity range. Allow more time for drying in adverse conditions. Avoid applying thick coats.
Rust bleeding through after painting
Ensure all loose rust was removed and that the paint was applied to a dry surface. For heavily rusted areas, a specific rust-inhibiting primer might be beneficial as a first coat, followed by the Direct to Metal paint, although the product is designed for direct application.
Pros and Cons
Pros
- Saves time due to minimal surface preparation needed.
- Direct application to rust removes the need for a separate primer.
- Water-based formulation leads to lower odour and easier cleanup.
- Quick drying time enables faster project completion.
- Offers long-term protection (15 years) against corrosion.
Cons
- Achieving the full 15-year protection requires strict adherence to application instructions.
- Colour and finish options may be limited compared to specialized paint systems.
- Water-based paints may not offer the same extreme durability in all harsh environments as some solvent-based alternatives.
- Requires specific temperature and humidity conditions for optimal drying and curing.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease and oil. For best adhesion, remove any loose rust or paint. If applying to sound, well-adhered existing paint, a light abrasion may improve the finish. Always test on a small, inconspicuous area first.
Compatibility: Suitable for use on bare metal, previously painted metal (ensure paint is sound and well-adhered), cast iron, aluminium, and wood. Not suitable for direct application to galvanised steel or other non-ferrous metals without a suitable primer (check manufacturer's recommendations).
Application: Stir thoroughly before use. Apply with a brush or roller. Apply a second coat for best results, following the recoat time specified on the packaging. For optimal 15-year protection, ensure an even application and complete coverage, paying attention to edges and corners. Avoid applying in very cold (<10°C) or humid conditions, or when rain is imminent.
Care: Clean brushes and equipment immediately after use with water. For general cleaning of the painted surface, use a damp cloth and mild detergent. Avoid abrasive cleaners.