Ronseal Direct to Metal Paint - Chilli Red Gloss 750ml
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Ronseal Direct to Metal Paint is designed for individuals seeking a durable and protective coating for metal surfaces with minimal preparation. Its key benefit is offering 15 years of protection and the ability to apply directly to rust, eliminating the need for a primer. A potential caveat is that optimal 15-year protection relies on strictly following the directions on the tin. This water-based, low-odour paint provides a tough finish and is shower-proof in just 30 minutes, making it suitable for various metal, cast iron, aluminium, and wood applications.
All features
| Colour | Red |
|---|---|
| Model Part Number | 39210 |
| Brand | Ronseal |
Extended Product Information
FAQs
Do I really need to use a primer with this paint?
No, Ronseal Direct to Metal Paint is designed to be applied directly to rust, eliminating the need for a separate primer in most cases. However, always ensure loose rust is removed first.
How long does the 15-year protection last?
The 15-year protection is guaranteed when the product is applied correctly and according to the instructions on the tin. Factors like extreme environmental conditions can affect longevity.
Can I use this paint on aluminium?
Yes, this paint is suitable for use on aluminium surfaces, as well as cast iron, wood, and general metal.
How long until I can touch the painted surface?
The paint is typically touch-dry within an hour and shower-proof in 30 minutes. However, recoating times vary, and full hardening takes longer. Always refer to the specific times on the product label.
What is the coverage rate of this paint?
Ronseal Direct to Metal Paint provides coverage of up to 8m² per litre.
How do I clean my brushes after using this paint?
Clean brushes and equipment immediately after use with water. This is a benefit of the water-based formula.
Can this paint be used on surfaces that will be submerged in water?
This paint is designed for above-water applications. It is shower-proof but not intended for continuous immersion.
Troubleshooting
Paint not adhering well or peeling
Ensure the surface was properly prepared (clean, dry, free from contaminants) and that all loose rust was removed before application. Check if previous coatings were compatible or if a primer was mistakenly omitted where needed.
Uneven finish or brush marks visible
Ensure paint is stirred thoroughly before and during use. Apply in thin, even coats using a good quality brush or roller. Avoid overworking the paint. Ensure application conditions are suitable (not too cold or humid).
Paint remains tacky after extended drying time
This can be due to applying too thickly, high humidity, or low temperatures. Ensure application is within the recommended temperature range (usually above 10°C) and humidity levels. Allow more time in adverse conditions or consider a second, thinner coat.
Rust bleeding through the paint
This indicates insufficient preparation or inadequate coverage. Ensure all loose rust was removed and that at least two coats have been applied. For very heavily rusted items, a specific rust-inhibiting primer might be beneficial as a first step, although the product is designed to work directly on rust.
Pros and Cons
Pros
- Eliminates the need for a primer, saving time and effort.
- Offers a substantial 15-year protective guarantee.
- Water-based and low-odour, making it more pleasant to use.
- Fast drying time allows for efficient project completion.
- Good coverage rate reduces the amount of paint needed.
Cons
- Requires strict adherence to instructions for the full 15-year protection claim.
- May not be suitable for all types of metal or heavily corroded surfaces without some initial cleaning.
- Water-based paints can sometimes be less durable in extremely harsh environments compared to specific solvent-based alternatives.
- Specific colour availability might vary.
- The drying time can be affected by ambient temperature and humidity.
Setup, Compatibility & Care Instructions
Setup:
Ensure the surface is clean, dry, and free from grease, oil, or wax. Remove any loose or flaking rust with a wire brush or sandpaper. If the surface has a high sheen, lightly abrade it to improve adhesion. Stir the paint thoroughly before and during use.
Compatibility:
Suitable for use on bare or previously painted metal, including cast iron, aluminium, and steel. It can also be applied to wood.
Application:
Apply using a brush or roller. Apply a minimum of two coats for optimal protection. Follow the specific recoating and drying times stated on the product packaging, as these can vary depending on temperature and humidity.
Care:
Clean brushes and equipment immediately after use with water. For the painted surface, clean with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the finish.