Crown Easyclean - Blue

Currently unavailable

Currently unavailable
The Crown Easyclean Matt Emulsion in Blue is designed for busy homes needing durable, washable walls. Its key benefit is its exceptional cleanability, allowing for repeated wiping without damaging the finish, making it ideal for high-traffic areas. A potential consideration is that while highly washable, it is still a matt emulsion and may show slight sheen differences if over-washed in one spot.
| Colour | Blue |
|---|---|
| Model Part Number | 320275 |
| Brand | Crown Paints |
It is generally recommended to apply two coats for optimal coverage and durability, allowing sufficient drying time between coats.
Yes, its washable nature makes it suitable for kitchens and living areas. For bathrooms, consider a specific bathroom paint if high humidity is a constant issue.
Drying times can vary based on conditions, but typically it is touch dry in 1-2 hours and recoatable after 2-4 hours. Always refer to the specific product instructions on the tin.
Ensure surfaces are properly prepared and apply the paint in consistent, even coats. Avoid stopping and starting mid-wall; aim for 'break lines' at natural edges or corners.
Absolutely. Its high washability makes it ideal for children's rooms where walls are prone to marks and spills.
Yes, Crown Easyclean is available in a range of colours. This guide specifically focuses on the 'Blue' variant.
For best results with matt emulsions, use a good quality synthetic brush for cutting in and a medium pile roller for the main surface area. Always ensure your tools are clean.
Ensure the paint was thoroughly stirred. Apply in even coats using a good quality roller or brush. Avoid overworking the paint.
Use a mild detergent solution and a soft, damp cloth. Gently wipe the stain. For stubborn marks, a second application of detergent might be needed, but avoid excessive scrubbing which can alter the sheen.
This can occur with excessive or harsh scrubbing. Use a gentle approach with a damp cloth and minimal pressure. For future cleaning, focus on gentle, consistent wiping rather than intense scrubbing.
Preparation: Ensure surfaces are clean, dry, and free from dust and grease. Remove any loose paint or wallpaper. Apply a suitable primer if necessary, especially on new or previously painted surfaces.
Application: Stir the paint thoroughly before use. Apply with a brush, roller, or spray. For best results, apply two coats, allowing adequate drying time between coats as per the product instructions. Ensure good ventilation during application and drying.
Compatibility: Suitable for interior walls, ceilings, wood, and metal. Not intended for exterior use or areas of constant water immersion.
Care: For routine cleaning, use a soft, damp cloth. For tougher stains, a mild detergent solution can be used. Gently wipe the affected area. Avoid abrasive cleaners or tools, as these can damage the matt finish. Always test cleaning methods on an inconspicuous area first.