Crown Easyclean - Soft Linen

Currently unavailable

Currently unavailable
The Crown Easyclean Matt Emulsion in Soft Linen is designed for high-traffic areas in busy homes, offering exceptional washability for walls, ceilings, wood, and metal. Its key benefit is maintaining a clean appearance through frequent cleaning, but it requires proper surface preparation for optimal adhesion. This durable paint allows for repetitive cleaning, proving 200 times tougher than standard matt paints, ensuring surfaces look their best for longer.
| Colour | Beige |
|---|---|
| Model Part Number | 320306 |
| Brand | Crown Paints |
It is designed to be 200 times tougher and more washable than Crown's standard Matt Paint, allowing for repetitive cleaning without damaging the finish.
Yes, Crown Easyclean is suitable for use on prepared interior wood and metal surfaces, as well as walls and ceilings.
Typically, allow 2-4 hours drying time between coats, but this can vary based on room temperature and humidity.
Use a soft, damp cloth or sponge with a mild detergent. Avoid abrasive cleaners or vigorous scrubbing.
This paint is intended for interior walls, ceilings, wood, and metal. It is not suitable for floors or exterior use.
Soft Linen is a warm, neutral beige that typically has subtle creamy undertones, providing a versatile and welcoming aesthetic.
Two topcoats are usually recommended for optimal coverage and durability. A mist coat may be beneficial on new or significantly different surfaces.
Ensure the surface was properly cleaned, dried, and prepared. Glossy surfaces should be abraded. Use an appropriate primer or undercoat if necessary.
Apply the paint evenly with a quality brush or roller. Avoid applying too thickly. Ensure adequate drying time between coats.
Use a damp cloth and mild detergent, and avoid excessive rubbing. For persistent marks, re-apply a thin, even coat in that area after ensuring it is clean and dry.
Apply a second coat. For significantly different underlying colors, a primer or mist coat may be required.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand any glossy surfaces to improve adhesion. For new or unpainted plaster, use an appropriate Crown plaster undercoat. For previously painted surfaces, apply a mist coat of thinned emulsion before the topcoats.
Application: Stir the paint thoroughly before use. Apply evenly with a brush or roller. Two topcoats are recommended for best results. Allow sufficient drying time between coats, typically 2-4 hours, depending on conditions.
Compatibility: This paint is suitable for interior walls, ceilings, wood, and metal. Ensure all surfaces are properly prepared and primed if necessary.
Care: To clean, use a soft, damp cloth or sponge with mild detergent. Avoid abrasive cleaners or excessive scrubbing. Wipe away marks gently. For stubborn stains, a slightly stronger detergent solution can be used, but always test in an inconspicuous area first.