Crown Easyclean - Silver
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Crown Easyclean Matt Emulsion in Silver is designed for busy households seeking a durable and washable paint finish for walls, ceilings, wood, and metal. Its key benefit is exceptional resistance to repetitive cleaning, remaining spotless up to 200 times more washable than standard matt paints. A potential caveat is its suitability primarily for interior use in areas prone to frequent marks or spills.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 320303 |
| Brand | Crown Paints |
Extended Product Information
FAQs
Can Crown Easyclean Matt Emulsion be used in a bathroom or kitchen?
While highly washable, this is a matt emulsion designed for general interior use. For areas with high moisture and steam, Crown recommends specific bathroom or kitchen paints for optimal performance and durability.
How many coats of Crown Easyclean Silver are recommended?
Two coats are generally recommended for optimal coverage, durability, and a consistent finish.
What is the drying time for this paint?
Drying times can vary based on conditions, but typically touch dry in 1-2 hours and recoatable in 2-4 hours. Always refer to the product packaging for specific instructions.
Can I paint over existing gloss paint with this product?
Yes, but the surface must be properly prepared. This includes cleaning, degreasing, and applying a suitable primer designed for glossy surfaces to ensure good adhesion.
Is this paint suitable for exterior use?
No, Crown Easyclean Matt Emulsion is specifically formulated for interior surfaces only.
How do I clean dried paint spills?
Dried paint spills should be removed carefully. For small amounts, try scraping gently once fully dry. For larger spills, it may require sanding and repainting the affected area.
What is the difference between standard matt paint and Easyclean Matt?
Easyclean Matt is formulated to be significantly more durable and washable, able to withstand repetitive cleaning cycles (up to 200 times more washable than Crown's standard matt) without compromising the finish.
Troubleshooting
Uneven finish or brush marks
Ensure paint is applied evenly and consistently. Use a high-quality brush or roller. Do not overwork the paint. Allow sufficient drying time.
Paint not adhering well
Check that the surface was properly cleaned and prepared. Apply a suitable primer if needed. Ensure the surface is not dusty or greasy.
Difficulty in washing off marks
Use a mild detergent solution and a soft cloth. Avoid abrasive cleaners. For very stubborn marks, a second gentle wipe may be needed after a short dwell time.
Colour variation between coats
Ensure adequate paint is applied for full coverage. Allow the first coat to dry completely before applying the second. Stir the paint thoroughly before and during application.
Pros and Cons
Pros
- Highly washable and scrubbable for easy maintenance.
- Durable finish that withstands repeated cleaning.
- Suitable for multiple interior surfaces.
- Maintains a clean appearance longer.
- Offers a modern aesthetic with its silver colour.
Cons
- Primarily for interior use.
- May require specific surface preparation for optimal adhesion.
- Can be more expensive than standard emulsion paints.
- Washability performance is compared to Crown's standard Matt Paint, not all competitor paints.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Apply a suitable primer if necessary, especially on new or previously unpainted surfaces. For best results, use Crown Trade alkali-resisting primers.
Application: Stir well before use. Apply evenly with a brush or roller. Two coats are recommended for best coverage and durability. Allow adequate drying time between coats according to manufacturer instructions.
Compatibility: This emulsion is designed for interior use on plaster, masonry, wallpaper, wood, and metal. Ensure all surfaces are properly prepared.
Care: For cleaning, use a soft, damp cloth or sponge. For stubborn marks, use a mild detergent solution. Avoid abrasive cleaners or excessive scrubbing, which can damage the finish. Always test cleaning methods on an inconspicuous area first.