Crown Easyclean - Powdered Clay

Currently unavailable

Currently unavailable
Crown Easyclean Matt Emulsion in Powdered Clay is designed for busy households needing durable, washable walls. Its key benefit is maintaining a fresh look despite frequent cleaning, making it ideal for high-traffic areas. A potential consideration is ensuring proper surface preparation for optimal adhesion and washability.
| Colour | Brown |
|---|---|
| Model Part Number | 320297 |
| Brand | Crown Paints |
It is designed to be highly washable, approximately 200 times tougher and more washable than Crown's standard Matt Paint, allowing for repetitive cleaning without compromising the finish.
Yes, Crown Easyclean Matt Emulsion is suitable for application on interior wood surfaces, provided they are properly prepared and primed if necessary.
Use a soft, damp cloth with a mild detergent. Wipe gently and avoid abrasive cleaners or tools to maintain the paint's integrity.
It is recommended to wait for the paint to cure fully, which typically takes 2-3 days, before performing any cleaning. For more thorough cleaning, wait up to 7 days.
This product provides a matt finish, which is a non-reflective, sophisticated look that helps to disguise imperfections on the surface.
While it is highly washable and durable, for areas with very high moisture or steam, a paint specifically designed for kitchens and bathrooms might be more suitable. However, it performs well in general living areas subject to frequent cleaning.
The Easyclean range is available in a variety of colours, including Botanical Extract (Green), Midnight Navy (Blue), Dash of Nutmeg (Grey), Mellow Sage (Green), White, Wheatgrass, and Antique Cream.
Ensure the paint is thoroughly mixed. Apply in even coats using a consistent technique. Check for adequate surface preparation; uneven absorption can cause streaking.
Allow the paint to cure for at least 7 days before deep cleaning. Use a mild detergent and a soft cloth. For stubborn marks, a slightly firmer but still gentle wipe may be needed. Avoid abrasive materials.
Verify the surface was properly cleaned, dry, and free from dust or grease before painting. Ensure appropriate primer was used if necessary. Check for compatibility with previous paint layers.
Setup:
Compatibility:
Care: