Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Rust-Oleum Painter's Touch Spray Paint in Dark Grey Gloss (400ml) is designed for DIY enthusiasts and homeowners seeking a quick and durable way to refresh furniture, decor, and other multi-surface projects. Its key benefit is the smooth, fast-drying, and high-quality finish it provides for both indoor and outdoor applications. A minor caveat is that coverage can vary, with approximately 2m² per litre recommended.
| Colour | Grey |
|---|---|
| Model Part Number | AE0040015E8 |
| Brand | Rust-Oleum |
This spray paint is designed for multi-surface use, including wood, metal, plastic, masonry, and laminate. Always test on an inconspicuous area first, especially on plastics.
The paint dries to the touch relatively quickly, but allow 24 hours for the paint to fully cure and harden.
Shake the can well before and during use, hold it at the recommended distance (10-12 inches), and apply in light, even coats with a steady motion. Overlap each stroke slightly.
Yes, the formulation is suitable for both interior and exterior use, providing a durable finish.
The coverage is approximately 2m² per litre, but this can vary depending on the surface and application thickness.
After use, turn the can upside down and spray for 2-3 seconds to clear the nozzle. If a blockage occurs, carefully remove the nozzle and clean it with a suitable solvent, following instructions on the can.
Yes, the Painter's Touch range is available in 42 colours and various finishes, including gloss, satin, and matt.
Shake the can more vigorously. Ensure the nozzle is not blocked. If blocked, remove and clean with a solvent (follow can instructions for nozzle cleaning). Test on scrap material.
You are likely applying the paint too heavily or holding the can too close. Apply in lighter, thinner coats and maintain the recommended distance from the surface.
The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants. Glossy surfaces may require light sanding for better grip.
Ensure consistent can shaking between coats and maintain an even application distance. Use sufficient light coats rather than one heavy coat.
Setup:
Compatibility: This paint is designed for multi-surface use including wood, metal, plastic, masonry, and laminate. Always test on an inconspicuous area first, especially on plastics, to check for compatibility and desired finish.
Care:
