Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for DIY enthusiasts and homeowners looking to refresh furniture and decor. The key benefit is achieving a stunning, durable satin finish with ease. A caveat is the drying time, which requires a 24-hour wait for full cure. Rust-Oleum Painter's Touch spray paint offers a fast-drying, high-quality formulation for interior and exterior use, available in 42 colors with gloss, satin, and matt finishes, providing a smooth, durable result.
| Colour | Green |
|---|---|
| Model Part Number | AE0050014E8 |
| Brand | Rust-Oleum |
The paint dries to the touch in a few hours, but requires 24 hours for a full cure, meaning it reaches its maximum hardness and durability during this period.
It is not recommended for direct application on most plastics without a suitable plastic primer first. Always test on an inconspicuous area.
A 400ml can covers approximately 2 square meters per litre on average, depending on the surface and application thickness.
Yes, this paint is suitable for exterior use. Ensure you work in a well-ventilated area, out of direct sunlight and wind, and protect surrounding areas from overspray.
It is generally recommended to apply multiple thin, even coats for the best finish. Allow adequate drying time between coats as per the instructions.
Wipe up wet paint immediately with a cloth dampened with mineral spirits. Dried paint may require gentle scraping or solvent treatment.
Yes, the Rust-Oleum Painter's Touch range is available in a variety of gloss and matt finishes, as well as satin.
Shake the can more vigorously. If the nozzle is clogged, remove it and soak it in a solvent like mineral spirits, then reattach and test spray on scrap material.
Apply paint in thinner coats from the recommended distance. If runs occur, allow them to dry slightly, then gently smooth out with a brush or rag dipped in solvent.
Ensure the surface was properly cleaned and prepped. Lightly sand the surface before application. For difficult surfaces, consider using a specialized primer first.
Apply additional thin coats rather than one heavy coat. Ensure you are overlapping your spray passes for even coverage.
Setup:
Compatibility:
This spray paint is designed for use on wood, metal, plaster, masonry, and previously painted surfaces. It is not recommended for direct application on plastics or polystyrene without a suitable primer.
Care:
Allow paint to dry to the touch within a few hours, but wait 24 hours for a full cure before heavy handling or cleaning. Clean up any drips or mistakes immediately with a cloth dampened with mineral spirits. For maintenance, wipe surfaces with a damp cloth. Store cans in a cool, dry place away from direct sunlight and heat.
