Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Rust-Oleum Painter's Touch Spray Paint is designed for DIY enthusiasts and homeowners looking to quickly refresh or add color to various surfaces. Its key benefit is providing a smooth, durable finish with fast-drying properties for efficient project completion. A caveat to consider is the importance of proper ventilation due to its spray application. This versatile spray paint comes in 42 colors and multiple finishes, offering a high-quality solution for both interior and exterior decorative projects.
| Colour | Red |
|---|---|
| Model Part Number | AE0040005E8 |
| Brand | Rust-Oleum |
It is touch dry in approximately 15-20 minutes and ready for recoating in 1 hour. Allow 24 hours for full drying and curing.
Yes, it can be used on plastic. For best results and adhesion, it is recommended to use a plastic primer before applying the spray paint.
One can covers approximately 2m² per litre. Actual coverage may vary depending on the surface and application method.
While it provides a durable finish, for very high-traffic areas, consider applying a clear protective topcoat for added durability, especially on items that will experience significant wear and tear.
Store the can upright in a cool, dry place, away from heat sources, sparks, and open flames. Ensure the nozzle is clean after use.
Yes, provided the existing oil-based paint is clean, dry, and in good condition. Lightly sanding the surface will improve adhesion.
Gloss finishes have a high shine, satin finishes have a slight sheen, and matt finishes have a flat, non-reflective appearance.
Shake the can more vigorously. Ensure the nozzle is not clogged. If clogged, remove and clean with a solvent like mineral spirits, then reattach.
Apply paint in lighter, even coats. Do not spray too close to the surface. Allow adequate drying time between coats.
Ensure the surface was properly cleaned and prepared. Lightly sand glossy surfaces. Use a primer if painting on a challenging material like plastic.
Apply additional thin coats rather than one thick coat. Ensure the can was shaken sufficiently and the nozzle is clear.
Check that the nozzle is not blocked. Ensure the spray button is fully depressed. Try turning the nozzle 1/4 turn and try again.
Setup:
Compatibility:
This spray paint is suitable for a wide range of surfaces including wood, metal, plaster, masonry, and plastic (with appropriate priming if needed). Always test on an inconspicuous area first.
Care:
