Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Rust-Oleum Painter's Touch spray paint in Chestnut Gloss is for DIY enthusiasts and homeowners looking to refresh or add decorative touches to various surfaces. Its key benefit is providing a smooth, durable, and quick-drying finish for both interior and exterior projects. A potential caveat is the average coverage rate, requiring careful estimation for larger jobs. This high-quality spray paint is available in 42 colors with gloss, satin, and matt finishes, offering a versatile solution for revamping home decor.
| Colour | Brown |
|---|---|
| Model Part Number | AE0040006E8 |
| Brand | Rust-Oleum |
The paint is typically dry to the touch in about 20 minutes, and a second coat can be applied after 1 minute. However, full curing can take up to 24 hours, depending on conditions.
On average, the paint covers approximately 2m² per litre. A 400ml can would therefore cover roughly 0.8m².
It is not recommended for direct application on most plastics. For best results, use a suitable plastic primer first before applying the spray paint.
After use, invert the can and spray for a few seconds until only clear propellant sprays out. If the nozzle is still clogged, remove it carefully and soak it in a solvent like lacquer thinner, then clear the opening with a fine pin.
Yes, this paint is designed for both interior and exterior use and provides a durable finish suitable for outdoor furniture.
Typically, two to three light coats provide the best coverage and finish. The number of coats may vary depending on the surface and desired effect.
Yes, provided the existing paint is sound and clean. For best adhesion, lightly sand glossy surfaces before applying the spray paint.
Shake the can more vigorously. Ensure the nozzle is not clogged; if it is, clean it by spraying upside down until clear. Ensure the ambient temperature is within the recommended range for application.
Apply paint in lighter, thinner coats. Hold the can further away from the surface and use a steadier, sweeping motion. Avoid over-application in one area.
Apply additional thin coats rather than one heavy coat. Ensure the surface was properly prepared and primed if necessary. Check if the correct color and finish are being applied to a suitable base.
Ensure application occurred in a well-ventilated area with appropriate temperature and humidity. Avoid applying excessively thick coats, which can impede drying.
Setup:
Compatibility:
This spray paint is suitable for a wide range of surfaces including wood, metal, plaster, masonry, and unglazed ceramic. It is not recommended for direct application on plastic or foam surfaces without a suitable primer.
Care:
Clean the spray nozzle immediately after each use by inverting the can and spraying for a few seconds until clear liquid emerges. Store the can in a cool, dry place away from direct sunlight and heat. For cleaning painted surfaces, use a mild soap and water solution with a soft cloth.
