Palatine Paints Shed & Fence Paint - Fire Opal - 2.5Lt
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Palatine Paints Shed & Fence Paint in Fire Opal is designed for homeowners looking to protect and beautify their outdoor wooden structures. Its key benefit is providing durable, oil-based protection against the elements. A caveat is that being oil-based, it requires specific solvents for cleanup and may have a stronger odor during application compared to water-based alternatives. This 2.5-litre container offers a rich, protective finish for sheds, fences, and other exterior woodwork.
All features
| Colour | Red |
|---|---|
| Model Part Number | W0072.5 |
| Brand | Palatine Paints |
Extended Product Information
FAQs
What is the best way to clean brushes after using this paint?
Clean brushes immediately after use with a suitable mineral spirit or turpentine substitute. Rinse thoroughly with clean solvent until all paint residue is removed.
How many coats of this paint should I apply?
For best results and optimal protection, two coats are generally recommended. Ensure the first coat is dry before applying the second.
Can I use this paint on wooden decking?
No, this paint is specifically formulated for sheds and fences and is not designed for use on high-traffic areas like wooden decking.
What is the drying time for Palatine Paints Shed & Fence Paint?
Drying times can vary depending on conditions, but typically it is touch dry in 4-6 hours and ready for a second coat in 12-16 hours. Full cure can take longer.
Is this paint suitable for previously painted surfaces?
It can be used on previously oil-based painted surfaces if they are in good condition. For best adhesion, lightly abrade the surface first. It is not recommended over existing water-based paints without appropriate preparation.
How should I store leftover paint?
Store in the original container with the lid tightly sealed in a cool, dry place, away from direct sunlight and frost. Turn the can upside down for a few minutes to form a seal, then turn it back upright.
What is the coverage rate of this paint?
Coverage is approximately 8-10 square metres per litre, depending on the surface porosity and application method. A 2.5 litre can should cover 20-25 square metres with one coat.
Troubleshooting
Paint is too thick to apply
Stir the paint thoroughly. If still too thick, you can add a small amount of Palatine Paints' recommended white spirit (no more than 5% by volume) to thin it slightly for application.
Uneven finish or brush marks visible
Ensure the paint is applied evenly and in thin coats. Avoid over-brushing. Work with the grain of the wood. Ensure adequate paint is on the brush, but not overloaded.
Paint is not drying
Check temperature and humidity. Oil-based paints require certain conditions to dry properly. Avoid applying in temperatures below 10°C or in very humid conditions. Ensure adequate ventilation.
Strong odor persists
Ensure good ventilation in the area where the paint has been applied. The odor will dissipate over time as the paint fully cures, which can take several days.
Pros and Cons
Pros
- Offers robust, long-lasting protection against weathering.
- The oil-based formulation ensures good adhesion and a durable finish.
- The 'Fire Opal' colour provides a distinct and attractive aesthetic.
- Suitable for various exterior timber structures like sheds and fences.
- Comes in a convenient 2.5-litre size for manageable projects.
Cons
- Requires mineral spirits or turpentine for cleaning brushes and equipment.
- May have a strong odor during application and drying.
- Longer drying times compared to water-based paints.
- Less environmentally friendly than some water-based alternatives.
- Not suitable for interior use.
Setup, Compatibility & Care
Preparation: Ensure the wooden surface is clean, dry, and free from dirt, dust, and loose paint. Treat any existing mold or mildew with a suitable cleaner. For bare wood, a primer designed for exterior wood may improve adhesion and coverage, especially on softwoods.
Application: Stir the paint thoroughly before use. Apply using a good quality brush designed for oil-based paints. Apply in thin, even coats. Two coats are recommended for best results. Avoid applying in very cold, damp, or direct strong sunlight conditions. Ensure adequate ventilation during application and drying.
Compatibility: This paint is specifically formulated for use on exterior timber such as sheds, fences, gates, and other wooden garden structures. It is not recommended for use on previously painted surfaces unless the old paint is oil-based and in good condition, or for use on decking or furniture.
Care: Clean brushes and equipment immediately after use with a suitable mineral spirit or turpentine substitute. Store the paint in a cool, dry place away from direct sunlight and frost. Ensure the lid is tightly sealed.