Palatine Paints Professional Shed & Fence Paint - 2.5Lt - Dark Brown

Currently unavailable

Currently unavailable
This guide is for homeowners and DIY enthusiasts looking to protect and enhance their wooden sheds and fences. The Palatine Professional Shed & Fence 2.5lt in Dark Brown offers a durable, oil-based finish for long-lasting weather protection. A key consideration is its oil-based formulation, which requires specific application and cleanup methods compared to water-based alternatives.
| Colour | Brown |
|---|---|
| Model Part Number | W0072.5 |
| Brand | Palatine Paints |
This product is specifically designed for sheds and fences. For decking, a specialized decking treatment would be more appropriate to ensure adequate durability and slip resistance.
Drying times can vary based on temperature and humidity. Typically, it will be touch dry in a few hours, but recoating will require 16-24 hours.
Clean brushes and equipment immediately after use with white spirit. Follow with warm, soapy water for a thorough clean.
It is generally not recommended to apply an oil-based paint over a water-based coating without proper preparation, such as thorough sanding and priming. It's best to use compatible coatings.
Coverage is approximately 8-10 square meters per litre, meaning the 2.5lt tin should cover between 20-25 square meters, depending on the surface porosity and application method.
While the paint is designed for direct application, priming bare or problematic wood can enhance adhesion and finish. For best results, especially on new or very porous wood, a suitable primer is recommended.
This specific product variant is 'Dark Brown'.
Ensure the surface was properly prepared, clean, dry, and free from contaminants. Re-sand and reapply if necessary.
Ensure paint was stirred thoroughly. Apply in thin, even coats, avoiding over-brushing. Check for appropriate application temperature and conditions.
This is common with oil-based paints, especially in cooler or more humid conditions. Ensure adequate ventilation and allow extra drying time between coats. Avoid applying too thickly.
Ensure good ventilation in the application area. The odour is typical of oil-based products and will dissipate as the paint cures.
Preparation: Ensure the surface of the shed or fence is clean, dry, and free from dirt, dust, and old flaking paint. Lightly sand any rough areas and remove all dust. For bare wood, a primer might be beneficial, although this product is designed for direct application.
Application: Stir the paint thoroughly before and during use. Apply with a good quality brush or a suitable exterior-grade roller. Apply in thin, even coats. Avoid applying in wet, freezing, or very humid conditions, or when temperatures are below 10°C or above 30°C.
Compatibility: This product is specifically designed for sheds and fences. It is suitable for use on most types of timber. Ensure surfaces are compatible before application.
Care: Clean brushes and equipment immediately after use with white spirit. Store paint in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the lid is tightly sealed to maintain product quality.