Palatine Paints Shed & Fence Paint - Cream - 2.5Lt
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to protect and beautify their outdoor wooden structures. The Palatine Professional Shed & Fence Paint in Cotton Cream offers a durable, oil-based finish for sheds and fences, providing long-lasting protection against the elements. While effective, its oil-based nature requires specific cleanup procedures and ventilation during application.
All features
| Colour | Cream |
|---|---|
| Model Part Number | W0072.5 |
| Brand | Palatine Paints |
Extended Product Information
FAQs
What is the best way to clean brushes after using this paint?
Clean brushes and equipment immediately after use with white spirit or a suitable paint thinner. Rinse thoroughly and allow to dry.
How long does the paint take to dry?
The paint is typically touch-dry within 6-8 hours and can be recoated after 16-24 hours, depending on temperature and humidity. Full curing may take longer.
Can I use this paint on garden furniture or decking?
This paint is specifically formulated for sheds and fences. It is not recommended for garden furniture or decking, as it may not provide the necessary flexibility or wear resistance for these surfaces.
What is the coverage rate of the 2.5Lt can?
Coverage varies depending on the surface texture and porosity, but a general estimate for two coats on standard sheds and fences is approximately 10-12 square meters per liter.
Is this paint suitable for use in very cold or hot weather?
It is best to apply the paint in temperatures between 10°C and 25°C. Avoid application in direct strong sunlight, frost, rain, or very high humidity.
What other colours are available in the Palatine Shed & Fence range?
The Palatine Shed & Fence range is available in several colours including Cedar, Dark Brown, Golden Brown, Anthracite Grey, Grey, Porcelain Blue, and White, in various sizes.
Do I need to use a primer with this paint?
For best results, especially on bare or previously treated wood, a primer is recommended. However, if the surface is sound, clean, and has been lightly sanded, it can sometimes be applied directly.
Troubleshooting
Paint is not adhering well or peeling.
Ensure the surface was properly prepared, clean, dry, and free from contaminants before application. Previous coatings may not have been compatible or adequately sanded. Consider a primer for better adhesion.
Uneven finish or brush marks visible.
Ensure paint was stirred thoroughly. Apply in thin, even coats, maintaining a wet edge to avoid overlapping dried areas. Use a high-quality brush appropriate for oil-based paints.
Paint is too thick or difficult to apply.
Stir the paint thoroughly. If necessary, a small amount of the recommended solvent (e.g., white spirit) can be added sparingly to improve flow, but follow manufacturer guidelines to avoid compromising the finish.
Slow drying time.
Drying times are dependent on temperature and humidity. Ensure application occurred within the recommended temperature range (above 10°C) and that there is adequate air circulation. Avoid applying in very humid conditions.
Pros and Cons
Pros
- Excellent durability and weather resistance.
- Provides a natural, attractive finish on wood.
- Good coverage for its size.
- Reliable brand for exterior wood protection.
Cons
- Oil-based formula requires solvent for cleanup.
- Requires good ventilation during application due to fumes.
- Longer drying times compared to water-based alternatives.
- May not be suitable for all types of wood finishes without proper preparation.
Setup, Compatibility & Care Instructions
Preparation: Ensure surfaces are clean, dry, and free from dirt, grease, and loose material. Remove any existing flaking paint. Sand down rough surfaces. If painting over a previous oil-based coating, a light sanding may be sufficient. For previously treated or difficult surfaces, consider a primer.
Application: Stir the paint thoroughly before use. Apply evenly with a good quality brush or roller suitable for oil-based paints. Apply a second coat after 16-24 hours, or when the first coat is dry to the touch and has been recoated within 48 hours. Avoid painting in direct sunlight or in damp conditions.
Compatibility: Suitable for use on all types of exterior timber, including sheds, fences, gates, and other garden woodwork. Not recommended for use on decking or surfaces that will be walked upon.
Care: Clean brushes and equipment immediately after use with white spirit or a suitable paint thinner. For spills, wipe away excess immediately and clean the affected area with white spirit. Store paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed.