Palatine Paints Professional Shed & Fence Paint - Shadelight Grey - 2.5Lt

Currently unavailable

Currently unavailable
This guide is for homeowners and DIY enthusiasts looking to protect and enhance their outdoor wooden structures like sheds and fences. The Palatine Paints Professional Shed & Fence Paint in Shadelight Grey offers a durable, oil-based finish for a sophisticated appearance. A key consideration is that oil-based paints require specific solvents for cleanup.
| Colour | Grey |
|---|---|
| Model Part Number | W0072.5 |
| Brand | Palatine Paints |
Use a good quality natural bristle brush suitable for oil-based paints to achieve the best finish.
Drying times can vary, but typically it is touch dry in 6-8 hours and ready for a second coat in 16-24 hours under normal conditions.
This paint is specifically formulated for sheds and fences and is not recommended for use on horizontal surfaces like decking due to different wear and tear requirements.
Clean all tools and spills immediately after use with white spirit or a suitable turpentine substitute. Do not use water.
Coverage varies depending on the surface porosity and application method, but typically one litre covers approximately 8-10 square metres.
Yes, this paint can be applied over a suitable oil-based primer on bare wood, or over existing well-adhered oil-based paint.
While mixing oil-based paints is possible, it's recommended to test small batches first as results can vary. For consistent colour, it's best to use them separately or purchase a pre-mixed colour.
Stir the paint thoroughly. If necessary, add a small amount of Palatine Paints Thinners (or a suitable oil-based paint thinner) for oil-based paints, following manufacturer guidelines for dilution ratios.
Ensure paint is applied evenly and avoid over-brushing. Apply in the direction of the wood grain. Allow adequate drying time between coats.
Check environmental conditions; ensure temperature is above 10°C and humidity is low. Avoid applying too thickly. Ensure adequate ventilation.
This can sometimes occur with oil-based paints. A second coat, applied correctly, will enhance the sheen and depth of colour.
Preparation: Ensure surfaces are clean, dry, and free from dirt, grease, and loose paint. Lightly sand rough surfaces. For bare wood, a suitable primer may be required.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller designed for oil-based paints. Apply in a well-ventilated area. Avoid painting in damp, humid conditions or direct strong sunlight.
Compatibility: Primarily designed for use on exterior timber, including sheds, fences, gates, and other wooden garden structures. Not recommended for use on decking or furniture.
Care: Clean brushes and equipment immediately after use with a suitable white spirit or turpentine substitute. Store paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed.