Plasti Dip Blaze Spray Aerosol - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Plasti Dip Blaze Spray Aerosol in Blue is designed for DIY enthusiasts and professionals seeking a vibrant, temporary, and protective rubber coating. Its key benefit is the ability to provide a durable, flexible, and easily removable finish on a wide range of materials, ideal for customization or protection. A key consideration is that for the brightest and most optimal Blaze colors, application over a white base coat of regular Plasti Dip is recommended. This product offers a unique combination of aesthetic appeal and functional protection.
All features
| Colour | Blue |
|---|---|
| Brand | Plasti Dip |
Extended Product Information
FAQs
Do I need a base coat for Plasti Dip Blaze Blue?
While Plasti Dip Blaze colors can be applied directly, a base coat of regular Plasti Dip in white is highly recommended for optimal performance and the brightest, most vibrant blue color.
How many coats of Plasti Dip Blue should I apply?
For best results and durability, apply a total of 4-6 thin, even coats, allowing adequate drying time between each layer.
Can Plasti Dip Blaze Blue be removed easily?
Yes, Plasti Dip is designed to be peelable. Ensure enough coats have been applied and allowed to cure properly before attempting removal.
What surfaces can I use Plasti Dip Blaze Blue on?
It can be applied to a wide variety of surfaces including metal, wood, plastic, fabric, glass, and masonry. Always test on a small, inconspicuous area first.
How long does Plasti Dip Blaze Blue last?
The longevity depends on the application, environmental conditions, and wear. It is durable enough to resist weather, chemicals, and abrasion, but it is also designed to be removable.
Can I paint over Plasti Dip Blaze Blue?
Yes, you can paint over Plasti Dip with most paints, but it is not recommended to paint other coatings over Plasti Dip if you intend to peel it off later, as it may bond permanently.
What is the difference between regular Plasti Dip and Blaze colors?
Blaze colors are fluorescent and designed for high visibility. They typically require a white base coat for maximum brightness, whereas regular Plasti Dip colors do not have this requirement.
Troubleshooting
Coating not peeling cleanly
Ensure sufficient coats (at least 4-6) were applied and allow adequate drying time (minimum 24 hours) before attempting removal. Ensure the surface was properly prepared. If removal is difficult, try warming the area slightly with a hairdryer on a low setting.
Uneven or blotchy finish
Apply in thin, even coats, maintaining consistent distance and speed. Ensure proper can shaking before and during use. Avoid applying in windy or overly humid conditions.
Coating is soft or gummy
Allow more drying time. Ensure application was not done in extremely high humidity or low temperatures. Avoid exposing to direct contact or harsh chemicals too soon after application.
Coating is lifting or peeling prematurely
Surface may not have been properly cleaned and prepped. Re-prep the surface and reapply, ensuring adequate adhesion and cure time.
Pros and Cons
Pros
- Easily peelable for temporary applications and design changes.
- Offers excellent protection against elements, chemicals, and physical wear.
- Versatile application on numerous surfaces.
- Provides a unique, eye-catching fluorescent finish.
- Adds a non-slip grip where applied.
- Acts as an insulator and sound deadener.
Cons
- Optimal brightness requires a white base coat, adding an extra step.
- Surface preparation is crucial for proper adhesion and removal.
- May require multiple coats for full coverage and durability.
- Can be challenging to achieve a perfectly smooth finish on complex shapes.
- Removal in cold temperatures can be more difficult.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from grease, oil, and contaminants.
- For best results with Blaze colors, apply a base coat of regular Plasti Dip in white.
- Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle.
- Hold the can 6-10 inches from the surface and apply in 2-3 thin, even coats, allowing 15-30 minutes drying time between coats.
- For optimal coverage and durability, apply a total of 4-6 coats.
- Allow the final coat to dry for at least 4 hours before handling or exposing to elements.
Compatibility:
Plasti Dip adheres well to most surfaces including metal, wood, plastic, fabric, glass, masonry, and concrete. It is not recommended for use on flexible vinyl or rubber where it may soften or degrade the material. Always test on an inconspicuous area first.
Care:
Clean gently with mild soap and water. Avoid abrasive cleaners or tools that could damage the coating. If a section becomes damaged, it can often be spot-repaired by carefully peeling away the damaged area and recoating.