Plasti Dip Blaze Spray Aerosol - Pink
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts, customizers, and hobbyists looking for a vibrant, temporary, and protective coating. The key benefit is achieving a striking, fluorescent pink finish that is peelable and durable. A caveat is that for optimal brightness and performance, it should be applied over a base coat of regular Plasti Dip (white recommended). Plasti Dip Blaze Spray Aerosol in Pink is an air-dried, flexible, rubberized coating that offers an easy-grip, non-slip, and insulating finish resistant to extreme weather, preventing cracking or peeling.
All features
| Colour | Pink |
|---|---|
| Brand | Plasti Dip |
Extended Product Information
FAQs
Can Plasti Dip Blaze be painted over?
Yes, Plasti Dip Blaze can be painted over with more Plasti Dip products. However, painting other types of paint over Plasti Dip is generally not recommended as it may not adhere properly or could affect its peelability.
How long does Plasti Dip Blaze last?
The lifespan of Plasti Dip Blaze can vary depending on application thickness, environmental exposure, and usage. Typically, it can last from 6 months to 2 years with proper care and application.
Can I use Plasti Dip Blaze on fabric?
Plasti Dip is not recommended for use on fabric as it can make the material stiff and may not adhere well or peel cleanly.
Does Plasti Dip Blaze need a top coat?
Plasti Dip Blaze is a finished coating and does not require a top coat for protection or durability. However, a clear Plasti Dip top coat can be applied if a glossier finish is desired.
What is the best way to remove Plasti Dip Blaze?
The best way to remove Plasti Dip Blaze is to start at an edge and peel it off slowly and steadily. If it is difficult to peel, gently warming the rubber coating with a hairdryer on a low setting can help loosen it.
Can Plasti Dip Blaze be used on car exteriors?
Yes, Plasti Dip Blaze can be used on car exteriors for temporary customization, such as on wheels, trim, or grilles. It is recommended to test on a small, inconspicuous area first.
Troubleshooting
Uneven spray pattern or spitting
Shake the can more frequently. Ensure the nozzle is not clogged; if it is, clear it with a pin or replace the can.
Coating is sticky or tacky after application
Ensure thin coats were applied and allowed sufficient drying time between each. Extreme humidity or cold can affect drying; move to a more suitable environment if possible.
Coating is difficult to peel
Ensure enough coats were applied (minimum 4-6 recommended). Gently warm the coating with a hairdryer on a low setting to soften it before peeling.
Color is not as vibrant as expected
Apply a base coat of regular Plasti Dip (white recommended) before the Blaze color. Ensure adequate light coats were applied, and the product is not past its expiration date.
Pros and Cons
Pros
- Creates a unique, eye-catching fluorescent finish.
- Allows for temporary customization that can be easily removed.
- Provides a protective layer against minor damage and weather.
- Flexible formula prevents cracking and peeling.
- Easy to apply with a spray can, suitable for DIY projects.
Cons
- Best results require a base coat (e.g., white Plasti Dip) for optimal color vibrancy.
- Requires multiple thin coats for best coverage and durability.
- Peeling can be difficult if not applied evenly or if left on for extended periods.
- May not adhere well to all surfaces without proper preparation.
- Finish is typically matte and may require a top coat for gloss.
Setup, Compatibility & Care
Preparation:
- Clean the surface thoroughly to remove dirt, grease, and debris. Ensure the surface is completely dry.
- For best results with Blaze colors, apply 1-2 coats of regular Plasti Dip (white is recommended) as a base coat. Allow the base coat to dry completely.
Application:
- Shake the aerosol can vigorously for at least one minute after hearing the mixing ball. Shake periodically during use.
- Hold the can 10-16 inches away from the surface.
- Apply in thin, even coats, using a steady back-and-forth motion. Overlap each stroke slightly.
- Allow 30 minutes of drying time between coats. Apply 4-6 thin coats for best coverage and durability.
- For complete curing, allow the final coat to dry for at least 4 hours.
Compatibility:
- Plasti Dip adheres to most surfaces including metal, plastic, wood, glass, and concrete.
- Not recommended for use on high-heat surfaces or areas requiring extreme chemical resistance.
Care:
- Clean gently with mild soap and water. Avoid abrasive cleaners or tools.
- To remove, peel the rubber coating off slowly and evenly. If difficult, warm the area slightly with a hairdryer on a low setting.