Dulux Weathershield Smooth Masonry Paint - Toasted Terracotta - 5L
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts seeking to protect and enhance exterior walls with a durable, vibrant finish. The Dulux Weathershield Smooth Masonry Paint in Toasted Terracotta offers up to 15 years of all-weather protection, featuring unique Stay Clean technology to resist dirt and mould growth, and is backed by a Weathershield Promise. A key consideration is that it is not suitable for common or Fletton bricks.
All features
| Colour | Orange |
|---|---|
| Model Part Number | 5329187 |
| Brand | Dulux |
Extended Product Information
FAQs
How many coats of Dulux Weathershield Smooth Masonry Paint should I apply?
For optimal protection and best results, it is recommended to apply two coats of the paint.
What is the drying time between coats?
You should allow a minimum of 4 hours drying time between the first and second coats. The final dry time for the surface is also approximately 4 hours.
Can this paint be used on all types of bricks?
No, this paint is specifically not recommended for use on common bricks or Fletton bricks. It is suitable for most other exterior masonry surfaces.
What is the 'Weathershield Promise'?
The Weathershield Promise guarantees that if your walls peel, flake, or develop mould growth within the paint film while you live in your home, Dulux will provide the value of a replacement product. This promise requires registration and is subject to specific terms and conditions.
Is this paint water-based or oil-based?
Dulux Weathershield Smooth Masonry Paint is a water-based product, which makes tool clean-up easier with water.
What is the approximate coverage rate of this paint?
The paint offers coverage of up to 15 square metres per litre, though actual coverage may vary depending on the surface's porosity and texture.
What are the ideal temperature conditions for applying this paint?
You should only apply this paint in dry conditions when the temperature is above 10°C. Avoid painting if bad weather, such as rain or frost, is forecast.
Troubleshooting
Paint is peeling, flaking, or showing mould growth prematurely.
This product comes with the Weathershield Promise. Ensure you registered the product and complied with the application requirements within 6 months of purchase. Refer to the Weathershield Promise terms and conditions for eligibility and claim procedures.
Poor coverage or patchy finish after application.
Ensure the wall surface was dry and properly prepared before painting. Verify that two coats were applied as recommended, allowing adequate drying time (4 hours) between coats. Uneven application or applying too thinly can also lead to poor coverage. Also, confirm the application temperature was above 10°C.
Colour appears inconsistent or streaky across the wall.
If using more than one can of paint, it is crucial to mix them together in a larger container before starting. This helps to blend any slight variations in tint between batches. If this wasn't done, try to complete sections with a single can or finish in corners before opening a new can.
Paint not drying within the expected 4 hours.
Check the environmental conditions. Application in temperatures below 10°C, high humidity, or lack of ventilation will significantly extend drying times. Ensure the surface was dry before painting. Do not apply if rain or bad weather is forecast.
Pros and Cons
Pros
- Exceptional Durability: Provides up to 15 years of protection against weather elements.
- Advanced Protection: Features technology to resist dirt and mould, keeping walls cleaner.
- Manufacturer Promise: Offers peace of mind with the Weathershield Promise against peeling, flaking, and mould.
- Easy Application: Can be applied using a brush or roller, suitable for DIY users.
- Water-Based Formula: Simplifies tool clean-up with water and is low odour.
Cons
- Brick Compatibility: Not suitable for use on common or Fletton bricks.
- Specific Application Conditions: Requires application in dry conditions, above 10°C, and without forecast of bad weather.
- Promise Conditions: The Weathershield Promise requires registration and is subject to specific terms and conditions.
- Drying Time Between Coats: Requires a 4-hour drying period between the two recommended coats.
Setup, Compatibility & Care
Proper setup and care are essential for achieving the best results and maximizing the lifespan of your Dulux Weathershield Smooth Masonry Paint.
Setup
- Surface Condition: The masonry surface must be thoroughly dry before application. Any moisture can compromise adhesion and performance.
- Cleaning: Ensure the surface is clean, free from loose debris, old flaking paint, dirt, and biological growth like algae or moss. Prepare the surface as per standard painting practices for exterior masonry.
- Tools: Have a suitable brush or roller, paint tray, and mixing stick ready. Ensure tools are clean.
Compatibility
- Masonry Surfaces: This paint is suitable for most exterior masonry surfaces, including roughcast, pebble-dash, brickwork (excluding specific types), and concrete.
- Important Restriction: Do not use this paint on common bricks or Fletton bricks. These brick types may react differently with the paint's formulation. Always test on an inconspicuous area if unsure about a specific brick type.
- Environmental Conditions: Apply only in dry conditions. The ambient temperature must be above 10°C. Avoid application when rain, strong winds, or frost are forecast, as these can negatively impact drying and finish.
Care & Maintenance
- Storage: Store the paint in a cool, dry place, away from direct sunlight and protected from frost. Ensure the lid is tightly sealed.
- Tool Cleaning: Clean brushes and rollers immediately after use with clean water while the paint is still wet. Dried paint is much harder to remove.
- Paint Film Care: The Stay Clean technology helps reduce dirt accumulation. For general cleaning, a gentle rinse with water or a soft brush may be used if needed, avoiding harsh chemicals or abrasive cleaning methods that could damage the paint film.