Dulux Weathershield Green Ivy Smooth Matt Masonry Paint - 5L Tub

Dulux Green Ivy Weathershield All Weather Protection Smooth Masonry Paint is an exterior wall pain...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide helps homeowners and DIY enthusiasts effectively use Dulux Weathershield Smooth Masonry Paint in Green Ivy, a high-performance, water-based exterior paint designed to protect masonry for up to 15 years. Its key benefit is providing long-lasting, all-weather protection with a clean finish thanks to its Stay Clean technology, though optimal results require thorough surface preparation.

All features

ColourGreen
Model Part Number5329186
BrandDulux

Extended Product Information

FAQs

How long will Dulux Weathershield Masonry Paint last?

This paint is formulated to provide all-weather protection for up to 15 years, ensuring a long-lasting finish and colour.

What type of surfaces can I use this paint on?

It is specifically designed for exterior masonry surfaces such as render, concrete, brickwork, and roughcast.

Is this paint water-based or oil-based?

Dulux Weathershield Masonry Paint is water-based, offering easier application and cleanup.

How does 'Stay Clean technology' work?

Stay Clean technology helps the paint film resist dirt and grime, preventing it from adhering to the surface and keeping your walls cleaner for longer.

Does this paint prevent mould and algae?

Yes, the paint film contains properties that protect against mould and algae growth, helping to maintain a pristine appearance.

How many coats do I need to apply?

For best results and optimal protection, it is recommended to apply two coats of Dulux Weathershield Masonry Paint.

Troubleshooting

Paint is not adhering properly or peeling.

Thorough surface preparation is key. Ensure the surface was clean, dry, and free of loose material before painting. If powdery, a suitable masonry primer may be needed.

Mould or algae growth reappears quickly after painting.

While the paint film resists growth, severe pre-existing mould or persistent dampness can be challenging. Ensure the surface was thoroughly cleaned with a fungicidal wash and allowed to dry completely before painting.

Uneven or patchy finish.

Ensure paint was thoroughly stirred before use. Apply paint evenly with appropriate tools. Allow adequate drying time between coats and apply the recommended number of coats (usually two) for optimal coverage.

Poor rain resistance or water ingress.

Verify that two full coats were applied and allowed to dry completely according to instructions before exposure to rain. Ensure any cracks or structural issues in the masonry were repaired before painting.

Pros and Cons

Pros

  • Exceptional Durability: Offers protection for up to 15 years, reducing the frequency of repainting.
  • Low Maintenance: Stay Clean technology and mould/algae resistance keep surfaces looking good with minimal effort.
  • All-Weather Performance: Reliable protection against rain, sun, and other elements.
  • Smooth Finish: Delivers a consistent, aesthetically pleasing smooth surface.
  • Easy Cleanup: Being water-based simplifies the cleaning of tools and spills.

Cons

  • Surface Preparation Critical: Requires thorough cleaning and preparation of surfaces for maximum adhesion and longevity.
  • Not for All Surfaces: Specifically designed for exterior masonry, not suitable for all outdoor surfaces.
  • Drying Time: While water-based, adequate drying time between coats and before exposure to severe weather is essential.

Setup, Compatibility & Care

Setup

  1. Preparation: Ensure the masonry surface is clean, dry, and sound. Remove any loose material, dirt, dust, or previous flaking paint. Wash down surfaces to remove mould or algae, then rinse thoroughly and allow to dry completely. For powdery or friable surfaces, apply a suitable masonry primer.
  2. Application: Stir the paint thoroughly before use. Apply with a good quality masonry brush or roller. For best results, apply two coats.
  3. Drying Time: Allow 2-4 hours between coats. Ensure the final coat is dry before exposing to heavy rain or harsh conditions.

Compatibility

  • Surfaces: Designed for exterior masonry surfaces including render, concrete, brickwork, and roughcast.
  • Environmental: Suitable for a wide range of outdoor temperatures during application (typically above 10°C).

Care

  • General Cleaning: Due to its Stay Clean technology, regular cleaning is often minimal. For occasional cleaning, gently wipe the surface with a soft cloth dampened with mild soapy water. Avoid abrasive cleaners or harsh scrubbing, as this can damage the paint film.
  • Storage: Store unused paint in a cool, dry place, protected from frost and direct sunlight. Ensure the lid is tightly sealed.