Dulux Weathershield Masonry Paint - Magnolia
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
For homeowners looking to refresh their exterior walls with a durable, long-lasting finish, Dulux Weathershield Masonry Paint in Magnolia offers an excellent solution. This water-based, low VOC paint provides an impeccably matt finish on various masonry surfaces, protecting against the elements while enhancing curb appeal. However, ensure proper surface preparation for optimal adhesion and finish, as with any exterior paint.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 5310871 |
| Brand | Dulux |
Extended Product Information
FAQs
What surfaces can I use this paint on?
Dulux Weathershield Masonry Paint is suitable for exterior brick, concrete, pebble-dash, and render surfaces.
How long does it take for the paint to dry?
The paint is touch dry relatively quickly, allowing for recoating in approximately 4 hours, depending on temperature and humidity.
Is this paint resistant to mould?
Yes, this masonry paint is formulated to be resistant to mould growth, as well as ultraviolet light and water.
Do I need to use a primer before applying this paint?
For bare, very porous, or powdery surfaces, it is recommended to use a suitable masonry primer or stabiliser to ensure optimal adhesion and finish. Always check the specific product instructions.
How do I clean my painting tools?
Being water-based, brushes and rollers can be easily cleaned immediately after use with warm, soapy water.
Is this paint environmentally friendly?
Yes, this paint is water-based and has minimal VOCs (Volatile Organic Compounds), making it a safer choice for you and the environment.
Troubleshooting
Paint is not adhering properly or peeling.
Ensure the surface was thoroughly cleaned and dry before application. Remove any loose or flaking paint, clean again, and consider using a suitable masonry primer/stabiliser before reapplying.
Visible brush marks or uneven finish.
Apply paint in thin, even coats. Use a high-quality brush or roller designed for masonry. Avoid overworking the paint once applied. Ensure the surface is smooth before painting.
Mould or mildew reappears after painting.
Thoroughly clean the surface with a fungicidal wash to kill any existing spores before painting. Ensure proper ventilation and address any underlying moisture issues on the wall.
Coverage seems less than expected.
Porous surfaces may absorb more paint; a primer can help. Ensure you are applying even coats and not too thinly. The provided 250ml pot is a tester size, so actual coverage for large areas will require larger cans.
Pros and Cons
Pros
- Highly Durable: Offers robust protection against common outdoor elements like UV, rain, and mould.
- Fast Drying: Allows for quicker project completion with a 4-hour recoat time.
- Easy Application: Can be applied effectively with common tools like a brush or roller.
- Environmentally Conscious: Water-based formula with minimal VOCs enhances user and environmental safety.
- Attractive Finish: Provides a consistent, long-lasting matt appearance.
Cons
- Surface Preparation Required: Demands thorough cleaning and preparation of surfaces for best results.
- Tester Pot Limited Coverage: The 250ml tester pot is primarily for colour sampling, covering only up to 1.5 m² for testing purposes, not large-scale painting.
Setup, Compatibility & Care
Surface Preparation
Proper surface preparation is crucial for ensuring optimal adhesion and finish.
- Clean: Ensure surfaces are clean, dry, and free from loose material, dirt, or organic growth (like mould or algae). Use a stiff brush or power washer for cleaning.
- Repair: Fill any cracks or holes with a suitable exterior filler and allow to dry.
- Prime (if necessary): On bare, very porous, or powdery surfaces, a suitable primer or stabiliser may be required. Always refer to Dulux recommendations for specific primers.
Compatibility
This paint is specifically formulated for exterior masonry surfaces including:
- Brick
- Concrete
- Pebble-dash
- Render
Application Tools
- Brush: For cutting in edges, corners, and detailed areas.
- Roller: For larger, flat surfaces, providing an even finish. Use a medium pile roller for masonry.
Application Steps
- Stir the paint thoroughly before use.
- Apply the first coat evenly with a brush or roller.
- Allow to dry for approximately 4 hours before applying a second coat.
- Apply a second coat for full colour depth and enhanced protection.
Care & Maintenance
- Tool Cleaning: Clean brushes and rollers immediately after use with warm, soapy water.
- Spills: Wipe up any spills or splashes immediately with a damp cloth.
- Storage: Store the paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed.