Hammerite Direct to Rust Smooth Metal Paint - Blue - 250ML
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Hammerite Direct to Rust Smooth Metal Paint is designed for homeowners and DIY enthusiasts looking to protect and beautify outdoor metalwork like gates, fences, and furniture. This 2-in-1 paint acts as both primer and topcoat, saving significant time by allowing application directly over rusty surfaces, though it is strictly formulated for outdoor use and requires careful surface preparation to ensure the best results.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 5084884 |
| Brand | Hammerite |
Extended Product Information
FAQs
Can I use this paint indoors?
No, this product is specifically formulated for outdoor use and should not be used in indoor settings.
Do I need to sand the metal first?
You need to abrade smooth surfaces and remove loose rust or flaking paint with a wire brush, but you do not need to prime the entire surface.
How long does it take to dry?
It is touch-dry in 1 to 2 hours, but you should wait at least 4 hours before recoating.
Can I use this on aluminium?
You can, but you must apply Hammerite Special Metals Primer to bare zinc, aluminium, or galvanised surfaces first.
What is the best way to clean my brushes?
Remove as much paint as possible immediately after use, then clean thoroughly using Hammerite Brush Cleaner & Thinners.
How many coats should I apply?
On sound previously painted metal, one coat is often sufficient, but bare or rusty metal requires two coats.
Troubleshooting
Paint is sagging on the surface
You have likely applied the paint too thickly. Use thinner, more controlled coats.
Reaction with existing paint
If the test patch shows a reaction, you must strip the old paint completely before applying Hammerite.
Poor adhesion to the metal
Ensure the metal was properly cleaned and degreased with detergent and dried before application.
Pros and Cons
Pros
- No primer or undercoat required
- Provides up to 8 years of rust protection
- Easy application with brush or roller
- Excellent weather resistance
- Smooth, professional gloss finish
Cons
- Not suitable for indoor use
- Requires thorough removal of loose rust and dirt first
- Contains solvent-based chemicals requiring proper ventilation
Setup, Compatibility & Care
Before starting, ensure all surfaces are free of grease, dust, and loose debris. Use a wire brush for cleaning and a diluted detergent for degreasing. Always rinse with clean water and allow the surface to dry completely before painting.
Compatibility Notes:
- For bare zinc, aluminium, or galvanized surfaces, you must use a specialized primer first.
- Always conduct a test patch on previously painted surfaces; if there is no reaction after one hour, you may proceed with full application.
Care and Cleanup:
- After finishing, remove excess paint from brushes immediately.
- Use Hammerite Brush Cleaner & Thinners to clean your equipment thoroughly.
- Store in a cool place, away from extreme temperatures and direct ignition sources.