Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
Hammerite Direct To Rust Smooth Finish Metal Paint is a versatile, all-in-one solution designed for DIYers and homeowners looking to restore and protect metal surfaces such as fences and furniture. Its primary benefit is the 3-in-1 formulation that acts as a primer, undercoat, and topcoat, providing up to 8 years of rust protection with a durable, high-sheen finish. One caveat is that this is a solvent-based product intended primarily for outdoor use, so proper ventilation and surface preparation are essential for success.
| Colour | Cream |
|---|---|
| Model Part Number | 5122064 |
| Brand | Hammerite |
No, this product is designed for outdoor use and is solvent-based, which requires good ventilation.
On previously painted metal in sound condition, 1 coat is usually sufficient. For bare or rusty metal, 2 coats are required.
Use Hammerite Brush Cleaner & Thinners to clean your tools after use.
No, this product acts as a primer, undercoat, and topcoat in one, unless you are painting bare zinc, aluminium, or galvanised surfaces.
It is touch dry in 1 to 2 hours and can be recoated after 4 hours.
Keep the product out of reach of children and ensure the area is well-ventilated during application and drying.
You have likely applied the coat too thickly. Use thinner layers and ensure even coverage across edges and corners.
The surface may still have grease or loose contaminants. Re-clean with detergent and ensure it is fully dry before attempting a new coat.
Perform a test patch first. If a reaction occurs with existing paint, you must strip the old finish completely before applying Hammerite.
Before you begin, ensure the ambient temperature is between 8°C and 25°C. For surface preparation, remove dirt, dust, and grease with a diluted detergent, rinse thoroughly, and let dry. If working with bare zinc, aluminium, or galvanised metal, you must first apply a specialized primer. When painting, stir gently—do not shake or mix vigorously—to maintain the consistency. Avoid over-applying, as heavy layers may cause sagging. Clean your brushes immediately after use with Hammerite Brush Cleaner & Thinners, as water will not effectively remove the solvent-based residue.
