Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners and DIY enthusiasts looking for a durable, long-lasting finish for exterior woodwork. The Ronseal 10 Year Weatherproof 2 in 1 Wood Paint offers up to a decade of protection with a combined primer and topcoat formula, saving time and effort. While convenient, users should be aware that achieving the full 10-year protection may depend on surface preparation and application conditions.
| Colour | Black |
|---|---|
| Model Part Number | 38781 |
| Brand | Ronseal |
This paint is suitable for all exterior woodwork, including fences, sheds, doors, and window frames.
No, this is a 2-in-1 product that acts as both a primer and a topcoat, simplifying the application process.
The paint is designed to offer up to 10 years of weatherproof protection, provided the surface is correctly prepared and the paint is applied according to instructions.
It is best to apply the paint in dry conditions when the temperature is between 10°C and 25°C. Avoid application in frost or freezing temperatures.
Clean brushes and equipment immediately after use with water.
Yes, it can be used on exterior decking to provide protection and a colour finish. Ensure the decking is clean and dry before application.
This specific product is Black Gloss. Ronseal offers this 10 Year Weatherproof Wood Paint in other colours and finishes like Satin.
Ensure the surface was properly prepared, cleaned, and dry before application. Lightly sand glossy surfaces. Avoid painting in damp or humid conditions.
Stir the paint thoroughly before and during use. Apply paint evenly with consistent brush strokes. Ensure adequate lighting to see coverage. Consider a third coat if necessary.
Stir the paint well. If necessary, a small amount of water (max 10%) can be added for easier application, but this may slightly affect the finish or durability. Ensure paint has not been stored in extreme temperatures.
Ensure the surface was not overly porous or absorbent. For very absorbent wood, a dedicated primer might be beneficial, or a third coat may be required for full opacity.
Preparation: Ensure the exterior wood surface is clean, dry, and free from dust, grease, and any loose or flaking paint. Lightly sand glossy or previously painted surfaces to ensure good adhesion. For bare or porous wood, ensure it is sound and free from rot.
Application: Stir the paint thoroughly before use. Apply one coat of the 2 in 1 paint as a primer, and then apply a second coat as a topcoat. For best results on bare wood or in high-wear areas, two full coats are recommended. Apply in dry conditions, avoiding direct sunlight or rain. The temperature should ideally be between 10°C and 25°C.
Compatibility: Suitable for all exterior woodwork. Not recommended for use on surfaces that will be in direct contact with food or drinking water.
Care: Clean brushes and equipment immediately after use with water. For ongoing maintenance, clean surfaces gently with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
