Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Ronseal 10 Year Weatherproof 2-in-1 Wood Paint in Spring Green Satin is designed for homeowners looking to protect and enhance exterior wood surfaces with a durable, long-lasting finish. Its key benefit is providing up to 10 years of protection without cracking, peeling, or blistering, and it applies directly without primer for a faster project. A minor consideration is that it's specifically formulated for wood, not other exterior materials.
| Colour | Green |
|---|---|
| Model Part Number | 38790 |
| Brand | Ronseal |
The paint is guaranteed not to crack, peel, or blister for up to 10 years when applied according to the manufacturer's instructions.
No, this is a 2-in-1 formula that acts as both a primer and topcoat, eliminating the need for a separate primer.
This paint is designed for exterior bare or previously treated wood surfaces such as fences, sheds, and gates.
One litre of this paint covers up to 12 square metres.
The paint is weatherproof in approximately one hour after application.
No, this product is not formulated for use on decking. Always refer to the product label for specific application guidance.
Clean your brushes and equipment with water immediately after finishing your painting job.
Ensure the wood surface was clean, dry, and free from contaminants before application. Re-sanding and reapplying may be necessary.
Stir the paint thoroughly. If still too thick, a very small amount of water (max 5%) may be added, but avoid over-thinning.
Ensure paint was applied evenly with a brush or roller. Apply a second coat if necessary, maintaining a wet edge to avoid lap marks.
This is unlikely within the 10-year guarantee period if applied correctly. Ensure the surface was adequately prepared and the paint was applied in suitable weather conditions (avoiding rain or frost shortly after application).
Setup: Ensure the exterior wood surface is clean, dry, and free from dirt, grease, and loose debris. For best results, lightly sand bare wood to ensure good adhesion. Remove any existing mould or mildew with a suitable cleaner. Stir the paint thoroughly before use.
Compatibility: This paint is specifically designed for use on exterior bare or previously treated wood. It is not suitable for treated timber, decking, or other surfaces like metal, plastic, or masonry.
Care: Clean application tools immediately after use with water. Store the paint in a cool, dry place, away from direct sunlight and frost. Keep the container tightly closed when not in use.
