Maxicolor Spray Paint - Pure Orange Gloss - 400ml - RAL2004
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking a vibrant, durable finish on various surfaces. The Maxicolor Spray Paint in Pure Orange Gloss offers a quick-drying, high-quality solution for indoor and outdoor projects on wood, metal, and plastic. A key benefit is its universal application and glossy, long-lasting result, though careful surface preparation is essential for optimal adhesion.
All features
| Colour | Orange |
|---|---|
| Model Part Number | MX2004 |
| Brand | MAXICOLOR |
Extended Product Information
FAQs
What surfaces can I use Maxicolor Spray Paint on?
This paint is suitable for wood, metal, and most plastics. For plastics, it is recommended to test on a small area or use a plastic primer for optimal adhesion.
How long does it take to dry?
The paint is fast-drying. Touch dry in about 10-15 minutes, and ready for recoating after the same interval. Full cure times may vary depending on conditions.
Can I use this paint outdoors?
Yes, the formula is designed for both indoor and outdoor use, providing a durable and weather-resistant finish.
How do I get a smooth, even finish?
Shake the can well, hold it about 25-30 cm away, and apply in thin, even strokes, moving the can continuously. Allow proper drying time between coats.
What is the RAL code for this color?
The RAL code for this Pure Orange Gloss color is RAL2004.
How should I store the spray can?
Store the can upright in a cool, dry place away from direct sunlight and heat sources. Ensure the nozzle is clean after use.
What is the can size?
This product comes in a 400ml can.
Troubleshooting
Uneven spray or splattering
Shake the can more vigorously. Ensure the nozzle is clean and not clogged. Apply in thinner coats and maintain consistent distance from the surface.
Paint not adhering to the surface
Ensure the surface is thoroughly cleaned, dry, and free from dust, grease, or rust. Sand lightly and reapply if necessary. For plastics, a primer may be required.
Runs or drips in the finish
Apply in thinner coats. Do not over-apply. Maintain a consistent spraying distance. Allow adequate drying time between coats.
Color appears different from expected
Ensure the correct RAL color code (RAL2004) was selected. Surface preparation and the underlying color can affect the final appearance. Test on a sample piece first.
Pros and Cons
Pros
- Durable and glossy finish
- Fast-drying formula saves time
- Adheres well to multiple surfaces
- Suitable for both interior and exterior use
- Bright, consistent color payoff
Cons
- Requires proper surface preparation for best results
- Nitrocellulose formula may require good ventilation
- Specific RAL color may not match all existing shades precisely
- Not suitable for all types of plastics without a primer
Setup, Compatibility & Care
Setup:
- Shake vigorously: Shake the can for at least two minutes after the mixing ball rattles.
- Test spray: Spray a small, inconspicuous area to check color and adhesion.
- Apply: Hold the can upright, about 25-30 cm from the surface. Apply in thin, even coats, moving the can back and forth.
- Recoat: Allow 10-15 minutes between coats for optimal results.
Compatibility:
- Suitable for: Wood, metal, and most plastics (consider a plastic primer for best adhesion on certain plastics).
- Not recommended for: Unprepared or unsuitable surfaces. Always test on a small area first.
Care:
- Storage: Store in a cool, dry place away from direct sunlight and heat sources. Keep the can upright.
- Cleaning: Clean the spray nozzle immediately after use by turning the can upside down and spraying for a few seconds until clear propellant emerges. Wipe nozzle with a solvent if necessary.