MaxiColor Gloss Silver Grey Spray Paint - MAXICOLOR - Grey - MX7001
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts, hobbyists, and homeowners looking for a versatile and high-coverage spray paint. The MaxiColor Gloss Silver Grey (RAL7001) offers excellent adhesion and a durable finish suitable for numerous surfaces, indoors and out. A key consideration is proper surface preparation for optimal results.
All features
| Colour | Grey |
|---|---|
| Model Part Number | MX7001 |
| Brand | MAXICOLOR |
Extended Product Information
FAQs
What surfaces can MaxiColor spray paint be used on?
MaxiColor spray paint is suitable for use on treated and untreated wood, metal, aluminium, glass, stone, and plastic. For best results on plastics, testing or using a plastic primer is advised.
How do I prepare a surface before painting?
The surface should be clean, dry, and free from dust, grease, and rust. Light sanding may be necessary for rough surfaces or to improve adhesion. A primer may be beneficial for certain materials like bare wood or metal.
How long does the paint take to dry?
Drying times can vary based on temperature, humidity, and coat thickness. Generally, it dries to the touch relatively quickly, but recoating may require waiting for at least 1-2 hours. Refer to the can for specific drying times.
Can I use this paint outdoors?
Yes, MaxiColor is formulated for both indoor and outdoor use, offering durability against weather conditions.
How do I clean the spray nozzle after use?
After painting, turn the can upside down and press the nozzle for a few seconds until only clear propellant sprays out. This prevents the nozzle from clogging.
Is this paint available in other colours?
Yes, MaxiColor paints are available in a wide range of RAL colours. This specific product is Silver Grey (RAL7001), but other colours are available.
What is the coverage rate of a 400ml can?
A 400ml can typically covers approximately 1.5 to 2 square meters, depending on the surface and application thickness. Always check the product label for specific coverage information.
Troubleshooting
Uneven paint application or streaks
Ensure the can is shaken sufficiently before and during use. Maintain a consistent distance (20-25 cm) from the surface and use smooth, sweeping motions. Apply thin coats rather than one heavy coat.
Paint not adhering to the surface
Verify the surface was properly cleaned and degreased. Ensure it was dry before application. For certain materials like bare metal or specific plastics, a primer may be required. Ensure compatibility with the surface material.
Nozzle clogging
Shake the can well before use. After spraying, invert the can and spray for a few seconds to clear the nozzle. If clogging persists, try removing the nozzle and cleaning it with a solvent suitable for paints, then reattach.
Paint runs or drips
Apply paint in thin, even coats. Avoid spraying too heavily or too close to the surface. If runs occur, allow them to dry, then gently sand them smooth and reapply a thin coat.
Pros and Cons
Pros
- Suitable for a wide range of materials.
- Provides excellent coverage, potentially reducing the number of coats needed.
- Durable finish suitable for both indoor and outdoor environments.
- Minimizes dripping for a cleaner application process.
- Available in a vast array of RAL colours, including this Silver Grey (RAL7001).
Cons
- Requires proper surface preparation (cleaning, priming if necessary) for best adhesion.
- Spray paint application can be messy if not done in a well-ventilated, protected area.
- Aerosol cans have environmental considerations regarding disposal.
- Gloss finish can highlight surface imperfections if the substrate is not smooth.
Setup, Compatibility & Care
Compatibility: This paint is compatible with treated and untreated wood, metal, aluminium, glass, stone, and most plastics. For plastics, testing on an inconspicuous area or using a plastic primer is recommended.
Setup:
- Ensure the surface to be painted is clean, dry, and free from dust, grease, and rust. Sand any rough surfaces and prime if necessary (especially for bare wood or metal).
- Work in a well-ventilated area, preferably outdoors or in a space with good airflow. Protect surrounding areas from overspray with drop cloths or masking tape.
- Shake the aerosol can vigorously for at least two minutes before use and periodically during application.
Care:
- To maintain the finish, clean surfaces gently with a damp cloth. Avoid abrasive cleaners.
- Store cans in a cool, dry place away from direct sunlight and heat sources.
- After use, clear the nozzle by inverting the can and spraying for a few seconds until only clear propellant emerges.