MAXICOLOR Spray Gloss - Blue - 400ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This MAXICOLOR Spray Gloss in Blue is ideal for DIY enthusiasts and professionals seeking a quick and durable finish on various surfaces. Its key benefit is a fast-drying, high-gloss coating with excellent adhesion for both indoor and outdoor projects. A potential caveat is the need for proper surface preparation to ensure optimal results.
All features
| Colour | Blue |
|---|---|
| Model Part Number | MX5010 |
| Brand | MAXICOLOR |
Extended Product Information
FAQs
How long does it take for the paint to dry?
The paint is typically touch-dry within 10-15 minutes and fully dry for recoating within 30-60 minutes, depending on temperature and humidity.
Can I use this paint outdoors?
Yes, this spray paint is formulated for durability and is suitable for both indoor and outdoor use.
What surfaces can I use this on?
It adheres well to metal, wood, and plastic surfaces. Always ensure surfaces are clean and properly prepared.
How should I store the spray can?
Store the can upright in a cool, dry place away from heat, sparks, and open flames. Do not store in direct sunlight.
How do I clean the spray nozzle after use?
After use, turn the can upside down and spray for a few seconds to clear the nozzle. If it becomes clogged, remove it carefully and clean with a suitable solvent like acetone.
Is this paint available in other colors?
Yes, MAXICOLOR offers a range of colors in their spray gloss line, including Yellow, Green, White, Grey, and Red.
Do I need a primer?
While the paint offers good adhesion, priming is recommended for optimal results, especially on challenging surfaces like bare metal or certain plastics, and to ensure color consistency.
Troubleshooting
Uneven spray or splattering
Shake the can more vigorously for another minute. Ensure the nozzle is not blocked. Clean the nozzle with a solvent if necessary after removing it from the can.
Paint is not adhering well
Ensure the surface was properly cleaned, degreased, and lightly abraded before application. Reapply after ensuring correct surface preparation.
Runs or drips appearing
Apply paint in thinner coats from a consistent distance (25-30 cm). Avoid over-spraying in one area. If drips occur, let them dry and then carefully sand them down before reapplying.
Can does not spray
Check that the nozzle is not clogged. Remove and clean it. Ensure the can is properly warmed to room temperature if stored in a cold environment.
Pros and Cons
Pros
- Fast-drying formula saves time during application.
- Provides excellent adhesion on common surfaces like metal, wood, and plastic.
- Durable finish suitable for both indoor and outdoor use.
- Bright, high-gloss Genetian Blue color enhances appearance.
- Manufactured by a reputable company (MotipDupli).
Cons
- Requires proper ventilation during use.
- Surface preparation is crucial for best adhesion.
- Spray paint application can be prone to drips if not applied correctly.
- Color matching with existing finishes may require testing.
- Not suitable for all types of plastics without a primer.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface to be painted is clean, dry, and free from grease, rust, and loose paint.
- For optimal adhesion, lightly sand glossy surfaces and prime if necessary, especially on plastics or bare metal.
- Shake the can vigorously for at least two minutes before use to ensure the pigment and propellant are well mixed.
- Perform a test spray on an inconspicuous area to check for color and adhesion.
Compatibility:
This spray paint is designed for use on metal, wood, and plastic surfaces. It is not recommended for use on Styrofoam or certain plastics that may react to solvents. Always check compatibility with specific materials if unsure.
Care:
To maintain the finish, gently clean surfaces with a damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the gloss coating. Store cans in a cool, dry place away from direct sunlight and heat sources.