Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners and decorators seeking a sophisticated, durable interior paint. The Craig & Rose 1829 Chalky Matt Emulsion in Steel Pole offers a rich, velvety matte finish that conceals imperfections and provides exceptional colour depth. While ideal for walls and ceilings, it requires a protective finish if used on furniture.
| Colour | Blue |
|---|---|
| Brand | Craig & Rose |
While this emulsion has enhanced wash resistance, it is primarily designed for general interior walls and ceilings. For high-moisture areas like bathrooms or kitchens, a specific moisture-resistant paint might be more suitable.
It is recommended to apply two coats of the Craig & Rose 1829 Chalky Matt Emulsion for optimal coverage and colour depth.
No, this paint is specifically formulated for interior use only.
The surface will be dry to touch in 1-2 hours, and you can apply an overcoat after 4 hours.
Clean all application tools immediately after use with warm water and mild detergent.
It is not recommended to mix this paint with other brands or types of paint, as it may affect the finish and performance.
This is a Chalky Emulsion with a luxurious soft matt finish and superior coverage and colour depth compared to standard flat wall paints. It also offers enhanced wash and rub resistance.
Ensure the surface is properly prepared (clean, dry, and primed if necessary). For porous surfaces like new plaster, try thinning the first coat with 5-10% water. Use a good quality brush or roller appropriate for emulsion paint.
Apply a second coat, ensuring even application. Check that you are using the same application method (brush or roller) throughout. Ensure adequate drying time between coats.
If the paint appears too thick, especially on porous surfaces, thin slightly with 5-10% clean water for the first coat. Stir thoroughly before and during application.
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. New, unpainted plaster surfaces should first be primed with a coat of Craig & Rose Primer Undercoat or a suitable wall primer. If using the paint on plaster and experiencing excessive suction, you can thin the first coat slightly with 5-10% clean water.
Application:
Apply two coats using a brush or roller for best results. Allow surface dry time of 1-2 hours between coats, and a 4-hour drying time before applying subsequent coats.
Compatibility:
Primarily designed for interior walls and ceilings. For furniture, application is possible but requires a protective wax or varnish finish to ensure durability against wear and tear.
Care:
Clean spills and marks gently. Due to its enhanced wash and rub resistance, light cleaning with a damp cloth is usually sufficient. Avoid abrasive cleaners.
