Craig & Rose 1829 Medici Crimson Chalky Matt Emulsion Paint - Red



Currently unavailable



Currently unavailable
This guide is for homeowners and decorators seeking to add a touch of historical opulence to their interiors. The Craig & Rose 1829 Medici Crimson Chalky Matt Emulsion Paint offers a rich, velvety red finish that evokes Renaissance grandeur and effectively conceals minor imperfections. While it provides exceptional colour intensity and a sophisticated matt look, users should be aware that its unique chalky texture may require specific application techniques for best results.
| Colour | Red |
|---|---|
| Brand | Craig & Rose |
This emulsion paint is suitable for interior walls, ceilings, and furniture.
Two coats are generally recommended for the best depth of colour and finish, ensuring adequate drying time between each coat.
The chalky matt finish is delicate. It can be wiped with a slightly damp cloth, but it is not as washable as vinyl matt emulsions. For added durability in high-traffic areas, a clear matt sealant can be applied over the dried paint.
It provides a classic matt finish with a soft, velvety texture, characteristic of chalky paints.
Yes, the formulation is designed to cleverly conceal minor imperfections on surfaces, contributing to a smoother final appearance.
While suitable for general interior use, it's not ideal for high-moisture environments like bathrooms unless thoroughly sealed with a compatible, water-resistant clear coat.
Drying times can vary, but typically it will be touch dry in 2-4 hours, with recoating possible after 4-6 hours. Allow full curing for maximum durability.
Ensure the paint was thoroughly stirred before and during application. Apply in thin, even coats using consistent brush or roller strokes. Check if primer was used on porous surfaces.
The surface may not have been properly prepared. Ensure it was clean, dry, and free from grease or dust. A suitable primer may be required for certain materials.
This can be normal with chalky emulsions. Ensure adequate drying time between coats and allow the final coat to cure fully. Consider a clear matt sealant if extra durability is needed.
Apply with a good quality brush or roller designed for emulsions. Work in manageable sections and maintain a wet edge to avoid lap marks.
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. For previously painted surfaces, lightly abrade and dust off. If painting over dark or vibrant colours, consider using a primer. For optimal results on new or porous surfaces, apply a suitable primer.
Application:
Stir the paint thoroughly before use. Apply liberally using a brush or roller, working in a criss-cross pattern for even coverage. Two coats are generally recommended for best results, allowing adequate drying time between coats. For a smooth, velvety finish, avoid overworking the paint.
Compatibility:
Suitable for interior walls, ceilings, and furniture. Not recommended for high-moisture environments or exterior surfaces.
Care:
Clean with a slightly damp cloth. Avoid harsh detergents or abrasive cleaners, which can damage the delicate chalky matt finish. For high-traffic areas, consider applying a clear, matt varnish over the dried paint to enhance durability and washability.