Craig & Rose Chalky Emulsion Paint - Coachella
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to achieve a sophisticated, matte finish on interior walls, ceilings, or furniture. The key benefit is its durable Chalky Emulsion formulation offering excellent depth of colour and wash resistance. A potential caveat is the need for a suitable primer on new plaster surfaces.
All features
| Colour | Grey |
|---|---|
| Brand | Craig & Rose |
Extended Product Information
FAQs
Can I use this paint on exterior surfaces?
No, this Chalky Emulsion paint is specifically designed for interior use only.
What is the best way to prepare a new plaster wall before painting?
New dry plaster surfaces must be primed with a coat of Craig & Rose Primer Undercoat or another suitable wall primer before applying the emulsion paint.
How do I clean the painted surface?
Light marks can be gently wiped away with a damp cloth. Avoid using abrasive cleaners.
Can this paint be used on wood floors?
While it can be used on timber floors, it requires a protective wax or varnish for durability. However, it's primarily recommended for walls, ceilings, and furniture.
What are the drying times for this paint?
The surface dries in 1-2 hours, and you can apply a second coat after 4 hours.
How many colours are available in the 1829 collection?
The 1829 collection offers 110 colours, carefully selected from vintage and historical sources.
Is this paint washable?
Yes, it has been specially enhanced to give better wash and rub resistance than normal flat wall paints, with an especially low sheen matt finish.
Troubleshooting
Paint not adhering well to new plaster.
Ensure the surface was properly primed with a suitable primer before application. Re-prime and re-paint if necessary.
Uneven finish or brush marks visible.
Ensure paint is stirred well. Apply thin, even coats. For absorbent surfaces, consider thinning the first coat slightly with water as per instructions. Use a good quality brush or roller.
Colour appears different after drying.
Ensure at least two full coats have been applied, as the first coat on a primed surface may appear lighter. Allow paint to cure fully before judging the final colour.
Surface marks easily.
This is characteristic of a chalky finish. For furniture or high-traffic areas, ensure a protective clear wax or varnish has been applied over the paint.
Pros and Cons
Pros
- Achieves a luxurious, soft, chalky matt finish.
- Offers superior coverage and excellent depth of colour.
- Durable and more resistant to washing and rubbing than standard matt paints.
- Suitable for multiple interior surfaces including furniture upcycling.
- Quick drying times allow for efficient application.
- Part of a curated historical colour palette.
Cons
- Requires a primer on new dry plaster surfaces.
- Furniture applications require an additional protective wax or varnish.
- May require thinning for application on highly absorbent surfaces like new plaster.
- Chalky finish can be more susceptible to marking if not properly cared for.
Setup, Compatibility & Care Instructions
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. New dry plaster surfaces *must* be primed with a coat of Craig & Rose Primer Undercoat or another suitable wall primer to ensure adhesion and an even finish.
Application:
Stir the paint thoroughly before use. Apply two coats using a brush or roller for best results. For very absorbent surfaces like new plaster, you can thin the first coat slightly with 5-10% clean water to improve adhesion and reduce brush marks.
Compatibility:
This paint is suitable for interior walls and ceilings. It can also be used on furniture, but requires a protective topcoat (wax or varnish) for durability.
Care:
Clean application tools immediately after use with water. For painted surfaces, use a damp cloth to wipe away light marks. Avoid abrasive cleaners, which can damage the chalky finish.