MAXICOLOR Spray Gloss Anthracite Grey - RAL7016 - 400ml
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to achieve a professional, durable gloss finish on various surfaces using MAXICOLOR Gloss Anthracite Grey Spray Paint. It's ideal for both indoor and outdoor projects, offering fast-drying capabilities and excellent coverage. Note that while the 400ml can provides ample coverage, surface preparation is crucial for optimal results.
All features
| Colour | Grey |
|---|---|
| Model Part Number | MX7016 |
| Brand | MAXICOLOR |
Extended Product Information
FAQs
What surfaces can I use this paint on?
MAXICOLOR Gloss Anthracite Grey Spray Paint is suitable for wood, metal, and plastic surfaces.
How long does it take for the paint to dry?
Drying times vary depending on environmental conditions, but it typically dries to the touch within a few minutes and is fully dry within a few hours. Refer to the can for specific instructions.
How much area does a 400ml can cover?
The coverage depends on the surface and application method. However, a 400ml can generally provides ample coverage for smaller projects. It is best to apply multiple thin coats for better results.
Do I need to prime the surface before painting?
While not always necessary, priming can improve adhesion and the final finish, especially on certain materials like metal. Always check compatibility of the primer with the paint.
Can this paint be used outdoors?
Yes, MAXICOLOR Gloss Anthracite Grey Spray Paint is suitable for both indoor and outdoor use.
How should I store the spray paint?
Store the spray paint in a cool, dry place away from direct sunlight and extreme temperatures.
What should I do if the nozzle clogs?
Turn the can upside down and spray until only propellant comes out to clear the nozzle. If the nozzle remains clogged, try cleaning it with a pin. Otherwise, replace it with a new one.
Troubleshooting
Paint is running or dripping.
Apply thinner coats and ensure the can is held the correct distance from the surface. Reduce the amount of paint applied in each pass.
Uneven finish or texture.
Ensure proper surface preparation (sanding and cleaning). Apply even coats and maintain the correct distance from the surface.
Paint not adhering to the surface.
Make sure the surface is clean, dry, and free of any contaminants. Consider using a primer suitable for the material before applying the paint.
Clogged spray nozzle.
Clean the nozzle after each use. If clogged, try using a pin to clear the nozzle. If the nozzle is still clogged, replace it with a new one.
Pros and Cons
Pros
- Fast-drying formula saves time.
- Suitable for a wide range of materials.
- Provides a durable and glossy finish.
- Easy to apply with the spray format.
- Good coverage from the 400ml can.
Cons
- Requires proper surface preparation for best results.
- Odor may be present during application and drying.
- May require multiple coats for complete coverage depending on the surface and existing color.
- Specific color matching might be difficult if touch-ups are needed later.
Setup, Compatibility & Care
- Preparation: Clean the surface thoroughly, removing any dirt, grease, or rust. Sand the surface lightly to promote adhesion.
- Compatibility: This paint is compatible with wood, metal, and plastic surfaces. Always test on a small, inconspicuous area first to ensure compatibility and desired results.
- Application: Shake the can well before use. Hold the can approximately 12 inches from the surface and apply in even, sweeping motions. Apply several thin coats rather than one thick coat.
- Drying: Allow the paint to dry completely between coats and before handling. Drying times may vary depending on environmental conditions (temperature and humidity).
- Care: Clean spray nozzles after use by turning the can upside down and spraying until only propellant comes out. Store cans in a cool, dry place.