Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone looking to protect and restore metal surfaces affected by rust. Hammerite No.1 Rust Beater provides a high-build finish that not only kills existing rust but also primes and undercoats in one application, saving you time and effort. Keep in mind that proper surface preparation is crucial for optimal results.
| Colour | Grey |
|---|---|
| Model Part Number | 5158238 |
| Brand | Hammerite |
It is suitable for use on ferrous metals such as metal railings, gates, garage doors, and fire surrounds.
Two coats of Hammerite No.1 Rust Beater are recommended for optimal rust protection.
Yes, you can apply a suitable Hammerite topcoat/paint system after a minimum of 6 hours (24 hours for best results).
The drying time is approximately 2 hours. Allow at least 6 hours between coats and before applying a topcoat.
Clean brushes and tools with Hammerite Brush Cleaner & Thinners or white spirit immediately after use.
The surface coverage is approximately 12 m²/L.
Yes, Hammerite No.1 Rust Beater is suitable for both indoor and outdoor use.
No, it is not recommended for use on non-ferrous metals like aluminum.
Ensure the surface is properly prepared (clean, degreased, and abraded). Allow the paint to dry completely before applying subsequent coats. If necessary, thin the paint with Hammerite Brush Cleaner & Thinners.
Ensure all loose rust is removed before application. Two coats of Hammerite No.1 Rust Beater are recommended. Allow sufficient drying time between coats.
Use a good quality brush. Apply the paint evenly, avoiding over-brushing. For a smoother finish, use a roller.
Thin the paint with Hammerite Brush Cleaner & Thinners according to the product instructions.
Ensure adequate ventilation and apply in the recommended temperature range (8 to 25°C). Avoid applying in humid conditions.
Setup:
Compatibility:
Care:
