Shopping.co.uk

Hammerite No1 Rust Beater - Dark Brown - 250ml

Not AvailableHammerite No1 Rust Beater - Dark Brown - 250ml
Not Available
Not Available
Not Available
Not Available

Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and preven...

Currently unavailable

Colour
BeigeBrownGrey

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to protect metal surfaces from rust with Hammerite No.1 Rust Beater. The product effectively kills rust, primes, and undercoats in a single application, providing a high-build finish. However, proper surface preparation is crucial for optimal results. It is ideal for use on fire surrounds, metal railings, and garage doors, offering corrosion resistance and compatibility with most topcoats.

All features

ColourBrown
Model Part Number5092810
BrandHammerite

Extended Product Information

FAQs

How many coats of Hammerite No.1 Rust Beater should I apply?

Apply two coats for optimal protection and rust prevention.

How long should I wait between coats?

Allow 6 hours between coats.

Can I apply a topcoat over Hammerite No.1 Rust Beater?

Yes, you can apply a suitable topcoat after a minimum of 6 hours. For best results allow 24 hours.

What tools can I use to apply Hammerite No.1 Rust Beater?

You can use a brush or a roller. For roller application, thin the paint as needed.

How do I clean my brushes and rollers after use?

Clean your tools with Hammerite Brush Cleaner & Thinners or white spirit.

Is Hammerite No.1 Rust Beater suitable for outdoor use?

Yes, it is suitable for both indoor and outdoor use.

What is the coverage rate of Hammerite No.1 Rust Beater?

The surface coverage is approximately 12 m²/L.

What should I do if I get the product on my skin?

Remove the product immediately with soap and water. If irritation persists, seek medical advice.

Troubleshooting

Paint not adhering properly.

Ensure the surface is thoroughly cleaned, degreased, and abraded before application. Check that there is no loose rust or flaking paint.

Rust reappearing after application.

Ensure all rust is removed before applying the Hammerite No.1 Rust Beater. Multiple coats may be required on heavily rusted areas.

Paint is too thick for roller application.

Thin the paint with Hammerite Brush Cleaner & Thinners, following the recommended ratio (9 parts paint to 1 part thinner).

Pros and Cons

Pros

  • Kills rust and prevents new rust from forming.
  • Combines priming and undercoating for convenience.
  • Compatible with most topcoats for versatile finishing options.
  • Easy to apply with brush or roller.
  • Provides a high-build, durable finish.

Cons

  • Requires thorough surface preparation for best results.
  • Drying time of 2 hours between coats.
  • Strong solvent-based odor during application.
  • Requires Hammerite Brush Cleaner & Thinners or white spirit for tool cleaning.
  • Contains volatile organic compounds (VOC).

Setup, Compatibility & Care

  1. Surface Preparation: Remove loose rust, scale, and old paint using a wire brush or coarse abrasive paper. Abrade clean steel with emery paper to provide a key. Degrease with white spirit if necessary.
  2. Application: Stir the paint thoroughly before use. Apply two coats by brush or roller, allowing 6 hours between coats. For roller application, thin with Hammerite Brush Cleaner & Thinners. Ensure corners and edges are well covered.
  3. Compatibility: Compatible with most topcoats. Always allow the Hammerite No.1 Rust Beater to dry for a minimum of 6 hours before applying a topcoat.
  4. Tools: Clean brushes and rollers with Hammerite Brush Cleaner & Thinners or white spirit after use.
  5. Storage: Keep the product in a cool, dry place, away from heat and open flames. Keep the container tightly closed.