Shopping.co.uk

Hammerite No.1 Rust Beater - Beige - 250ML

Not AvailableHammerite No.1 Rust Beater - Beige - 250ML
Not Available
Not Available
Not Available
Not Available

Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and preven...

Currently unavailable

Colour
BeigeBrownGrey

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to remove rust and protect metal surfaces using Hammerite No.1 Rust Beater. It's designed to kill rust, prime, and undercoat in one application, providing a high-build finish. Keep in mind that proper surface preparation is key for optimal results.

All features

ColourBeige
Model Part Number5092815
BrandHammerite

Extended Product Information

FAQs

How long does it take for Hammerite No.1 Rust Beater to dry?

Allow 2 hours between coats.

Do I need to apply a topcoat?

Yes, a suitable Hammerite topcoat should be applied after a minimum of 6 hours.

Can I use Hammerite No.1 Rust Beater on plastic?

No, it is designed for metal surfaces only.

How should I clean my brushes after use?

Use Hammerite Brush Cleaner & Thinners or white spirit.

What is the coverage of the paint?

Approximately 12 m²/L

Is this product suitable for outdoor use?

Yes, it is suitable for both indoor and outdoor use.

How many coats should I apply?

Apply two coats of Hammerite No.1 Rust Beater.

Troubleshooting

Paint not adhering to the surface.

Ensure the surface is properly prepared, degreased, and free of loose rust. Lightly sand the surface before application.

Rust reappearing after application.

Ensure all rust is removed before application. Apply a topcoat for additional protection. Use two coats of Hammerite No.1 Rust Beater.

Brush marks visible after application.

Apply the paint evenly. Thin with Hammerite Brush Cleaner & Thinners if necessary. Use a roller for a smoother finish.

Pros and Cons

Pros

  • One-step application, saving time.
  • Provides a protective and high-build finish.
  • Suitable for both indoor and outdoor use.
  • Easy to apply with a brush or roller.
  • Can be applied directly to rust

Cons

  • Requires proper surface preparation for best results.
  • Drying time of 2 hours between coats.
  • Requires a topcoat for complete protection.
  • Solvent based product, requiring adequate ventilation
  • May require multiple coats for heavily rusted areas.

Setup, Compatibility & Care

Setup

  1. Surface Preparation: Remove loose rust, scale, and old paint by wire brushing or using coarse abrasive paper. Abrade clean steel with emery paper.
  2. Degreasing: Degrease the surface with white spirit if necessary.
  3. Application: Stir the paint thoroughly before use. Apply two coats, allowing 6 hours between coats. For best results, allow 24 hours before applying the topcoat.

Compatibility

  • Compatible with most topcoats. Ensure the topcoat is suitable for metal surfaces.
  • Can be used on various metal surfaces, including iron and steel.

Care

  • Clean tools with Hammerite Brush Cleaner & Thinners or white spirit after use.
  • Store in a cool, dry place away from heat and open flames.
  • Ensure proper ventilation when applying.