Crown Walls & Ceilings Matt Emulsion Paint - Linen Blend - 2.5L


Currently unavailable


Currently unavailable
The Crown Walls & Ceilings Matt Emulsion Paint in Linen Blend is an excellent choice for homeowners and DIY enthusiasts seeking to refresh their interior spaces with a sophisticated, non-reflective finish. Its primary strength lies in its easy application and quick-drying formula, enabling efficient decorating projects. However, users should note that, as a traditional matte finish, it may require more careful cleaning than more durable, washable finishes often found in high-traffic or moisture-prone areas.
| Colour | Beige |
|---|---|
| Model Part Number | 5096487 |
| Brand | Crown |
This paint is designed for interior walls and ceilings. It can be used on plaster, plasterboard, brick, cement, and properly prepared wallpaper. Ensure all surfaces are clean, dry, and sound before application.
A 2.5L tin typically covers approximately 25 square meters per coat, depending on the surface porosity. It's always best to measure your wall area and account for two coats, plus a little extra for touch-ups. Info needed: [Provide average coverage per litre if available on product packaging].
For previously painted surfaces in good condition, a primer is usually not necessary. However, for new plaster, very porous surfaces, or when making a drastic color change, applying a suitable primer or a diluted 'mist coat' of this paint will improve adhesion and finish.
This paint is quick-drying, typically touch dry in 1-2 hours and ready for a second coat in 2-4 hours. Always allow adequate drying time, especially in cooler or humid conditions.
As this is a water-based emulsion, you can easily clean brushes and rollers with warm, soapy water immediately after use. Rinse thoroughly until all paint residue is gone, then reshape brushes and allow them to air dry.
While it can be used in these areas, traditional matte emulsion may not offer the same level of moisture and steam resistance as specialist kitchen and bathroom paints. For high-humidity environments, a dedicated moisture-resistant paint is often a more durable choice.
Store leftover paint in its original container with the lid tightly sealed. Keep it in a cool, dry place, away from direct sunlight and frost. Do not allow the paint to freeze, as this can affect its quality.
Ensure the paint was thoroughly stirred before and during application. Apply an even second coat, allowing sufficient drying time between coats. Highly absorbent or new surfaces may benefit from a diluted 'mist' coat or primer before the main coats.
Avoid overloading the brush or roller. Apply paint with smooth, consistent strokes, blending wet edges. Do not overwork the paint once it's on the surface. Use high-quality brushes and rollers suitable for emulsion paint.
Ensure good ventilation in the room by opening windows and doors. High humidity or low temperatures can prolong drying time. Apply paint in thin, even coats rather than thick ones.
This often indicates poor surface preparation. Ensure surfaces are clean, dry, sound, and free from loose material before painting. Scrape off all loose paint, sand, prime, and then repaint.