Crown Candy Clay Matt Emulsion Paint 2.5L - Red

Currently unavailable

Currently unavailable
The Crown Walls and Ceilings Candy Clay Matt Emulsion Paint 2.5L is ideal for DIY enthusiasts and homeowners looking to revitalize their indoor spaces with a modern, non-reflective finish. Its key benefit is the virtually odour-free Breatheasy formula, making application more pleasant, coupled with its thick, creamy consistency that ensures easy application and great coverage. While offering a vibrant 'Candy Clay' red hue, users should note its distinct matt appearance means no surface shine, which might not suit preferences for glossier finishes.
| Colour | Red |
|---|---|
| Brand | Crown |
This standard matt emulsion is best suited for low to medium humidity areas like living rooms and bedrooms. For bathrooms or kitchens, a paint specifically formulated for high moisture environments (e.g., 'Bathroom Paint' or 'Kitchen Paint') is generally recommended for better durability against steam and condensation. > Info needed: [Is there a specific moisture resistance rating for this product?]
Typically, two coats are recommended for optimal colour depth and coverage, especially if painting over a darker or very porous surface. A single coat may suffice on a well-prepared, similar coloured base.
The typical recoat time for matt emulsion is around 4 hours, but this can vary based on temperature and humidity. Always refer to the specific instructions on the paint can for precise drying times. > Info needed: [Specific drying time on product label]
Matt emulsion paints are generally wipeable, meaning minor marks can be gently wiped with a damp cloth without rubbing vigorously. They are not designed for heavy scrubbing. For highly washable surfaces, consider paints with a 'durable matt' or 'wipeable' classification, though this specific product is a standard matt emulsion.
Do not pour leftover paint down the drain. Allow small amounts of paint to dry out in the tin, then dispose of it with household waste. For larger quantities, contact your local council or recycling centre for advice on hazardous waste disposal.
While technically possible, matt emulsion paints often need dilution for spray gun application, and results can vary. For best results and control, traditional roller and brush application is recommended. Always follow spray gun manufacturer's instructions for paint compatibility and dilution ratios.
Ensure the surface is properly prepared (clean, dry, smooth). Apply a suitable primer or mist coat on porous surfaces. Apply paint evenly with consistent pressure and allow adequate drying time between coats.
Check if the surface was very dark or highly absorbent. A primer may be needed. Ensure sufficient paint is loaded onto the roller/brush. Allow previous coat to dry fully before applying the next.
Although 'Breatheasy' is virtually odour-free, some faint smell might occur. Ensure continuous good ventilation during and after painting until the paint is fully cured. Air the room thoroughly.
Avoid over-brushing or over-rolling the paint. Apply in consistent, even strokes. Ensure paint is applied thinly rather than too thickly in one go. Use high-quality brushes and rollers.
Before opening, gently shake or stir the paint for even consistency. Ensure the room is well-ventilated during application. Protect surrounding areas with dust sheets and painter's tape.
Crown Walls and Ceilings Matt Emulsion is designed for interior walls and ceilings, including plaster, drywall, and previously painted surfaces. For bare wood or metal, or specific plastic surfaces, a suitable primer designed for those materials should be used first, as this paint is not formulated for direct application on such substrates.
Clean brushes and rollers immediately after use with warm soapy water. For leftover paint, seal the tin tightly and store in a cool, dry, frost-free place. Do not empty paint into drains or watercourses.