Crown Botanical Extract Matt Emulsion Paint 5L - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Crown Walls and Ceilings Matt Emulsion Paint offers a simple and effective way to refresh your indoor spaces. Designed for ease of use, this paint helps achieve a smooth, modern matt finish on both walls and ceilings with its thick, creamy, and virtually odour-free formula. While it excels in coverage and ease of application, optimal results still depend on proper surface preparation and application techniques.
All features
| Colour | Green |
|---|---|
| Brand | Crown |
Extended Product Information
FAQs
What kind of finish does this paint have?
This is a matt emulsion paint, which provides a modern, non-reflective, flat finish.
Can I use this paint in a bathroom or kitchen?
While it can be used, standard matt emulsion is not typically recommended for high-humidity areas like bathrooms and kitchens, as it is generally not highly moisture-resistant or washable. For these areas, a specific bathroom or kitchen paint with enhanced moisture and scrub resistance is usually more suitable.
How much area does a 5L tin cover?
> Info needed: specific coverage area per liter (e.g., 10-12 square meters per liter). General guidance for 5L of matt emulsion is often around 50-60 square meters per coat, depending on surface porosity and texture. Always check the product label for exact figures.
Is this paint washable?
Matt emulsion paints are generally not highly washable or scrubbable. For cleaning, gently wipe marks with a soft, damp cloth. Rubbing too hard may burnish the surface or remove paint.
Do I need to dilute the paint?
The paint is formulated for direct use. However, for a first 'mist' coat on new or very porous plaster, it can be diluted with up to 10% clean water to aid absorption and provide a good base for subsequent coats. Always refer to specific instructions on the paint tin.
How long until I can apply a second coat?
> Info needed: specific recoat time. Typically, matt emulsion paints are touch dry in 1-2 hours and can be recoated after 2-4 hours, depending on temperature and humidity. Always check the paint tin for precise drying times.
Troubleshooting
Uneven finish or brush marks visible after drying.
Ensure the paint is thoroughly stirred before and during application. Apply paint evenly without overloading the brush or roller. Maintain a 'wet edge' by working quickly and systematically, avoiding going back over partially dried areas. If problem persists, lightly sand the affected area (if applicable), clean, and apply another even coat.
Poor coverage, requiring many coats.
Ensure the surface is properly prepared, clean, and primed, especially if painting over a dark or porous surface. Apply paint generously but evenly. Allow adequate drying time between coats before applying the next. Very dark or bright existing colours may naturally require more coats to achieve full opacity.
Paint appears patchy or inconsistent in colour.
This often indicates inconsistent absorption by the wall. Ensure the surface is uniformly primed. If painting over repairs, those areas may absorb paint differently; a spot prime on filled areas before full priming can help. Stir paint well to ensure pigment is evenly distributed. Apply full, even coats.
Paint peeling or flaking after application.
This usually points to poor surface preparation. Ensure the surface was completely clean, dry, and free of loose material before painting. Old, flaking paint should be scraped off and sanded smooth. Apply a suitable primer if adhesion is a concern on challenging surfaces.
Pros and Cons
Pros
- Low Odour: The Breatheasy formula significantly reduces typical paint smells.
- Smooth Matt Finish: Creates a modern, elegant, and non-reflective surface.
- User-Friendly: Thick consistency makes it easy to apply with good spread.
- Good Hiding Power: Offers great coverage, potentially reducing the number of coats needed.
- Suitable for Multiple Surfaces: Can be used on both walls and ceilings.
Cons
- Requires Surface Preparation: Like most paints, optimal results depend on proper cleaning and preparation of the surface.
- Not Highly Washable: Matt finishes are generally less durable against scrubbing than silk or eggshell finishes, meaning marks may be harder to remove without affecting the finish.
- Drying Time Required: Users must allow adequate drying time between coats and before exposing the surface to use.
- Colour Consistency: While the green colour is vibrant, variations in monitor display or lighting can affect perceived colour compared to the actual paint.
Setup, Compatibility & Care
Surface Preparation
For best results, proper surface preparation is crucial:
- Clean: Ensure walls and ceilings are clean, dry, and free from dust, dirt, grease, or loose flaking paint. Use a mild detergent solution if necessary, then rinse with clean water and allow to dry completely.
- Fill: Fill any cracks or holes with appropriate filler and sand smooth. Remove all sanding dust.
- Prime: For new plaster, porous surfaces, or if painting over a strong/dark colour, apply a suitable primer or a diluted first coat of this paint (up to 10% water) to create a consistent base. This ensures even absorption and optimal paint adhesion.
Application
- Stir: Stir the paint thoroughly before and during use to ensure colour consistency.
- Tools: Apply using a good quality brush for cutting in edges and corners, and a roller for larger areas. Use a medium pile roller for a smooth finish.
- Coats: Apply 1-2 coats. Allow ample drying time between coats. > Info needed: specific drying time between coats. For best results, typically 2-4 hours.
Compatibility
- This paint is suitable for use over most common interior wall and ceiling surfaces, including plaster, plasterboard, and previously painted surfaces.
- For optimal colour and finish, ensure any primer used is compatible with water-based emulsion paints.
Care & Storage
- Cleaning Tools: Clean brushes and rollers immediately after use with warm soapy water.
- Spills: Wipe up any spills or splatters immediately with a damp cloth.
- Storage: Store the paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed to prevent the paint from drying out. Keep out of reach of children and pets. Do not empty into drains or watercourses. Dispose of contents/container in accordance with local regulations.