KOBRA HP High Pressure Spray Paint 400ml - White - HP001
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Designed for street artists, graffiti writers, and professional crafters, the KOBRA HP High Pressure Spray Paint offers exceptional covering power and reliable performance on nearly any surface. Featuring a high-solid, 100% acrylic formula, this paint ensures immediate adherence and drip-free application even in challenging weather conditions; however, its high-pressure output requires a steady hand and practice to achieve precise control for detailed work.
All features
| Colour | White |
|---|---|
| Model Part Number | HP001 |
| Brand | KOBRA |
Extended Product Information
FAQs
Can I use different caps with KOBRA HP paint?
Yes, KOBRA HP is compatible with most standard female-valve graffiti spray caps if you wish to change the line width or spray pattern.
Is this paint suitable for indoor furniture projects?
While it works on many surfaces, the high-pressure output is optimized for outdoor use. If used indoors, ensure the area is extremely well-ventilated.
How long does it take to dry completely?
The thixotropic, fast-drying formula is usually dry to the touch within minutes, though full curing can take up to 24 hours depending on the ambient temperature.
Does this paint work on plastic?
It offers good adhesion to many plastics, but it is always recommended to prime the surface or test a small, inconspicuous area first.
How do I clear a clogged nozzle?
Remove the cap and soak it in a small container of acetone or paint thinner for a few minutes, then blow through it with compressed air.
Troubleshooting
The spray is sputtering or spitting paint
The can may not be shaken enough, or the nozzle is partially clogged. Shake for an additional minute or replace the cap.
Paint is dripping or running
You are likely holding the can too close to the surface or moving too slowly. Increase your distance or speed up your stroke.
Can pressure feels low
If the can is cold, soak the lower half in lukewarm water for a few minutes to increase pressure. Never use direct heat or an open flame.
Pros and Cons
Pros
- Excellent adhesion on various surface types
- High-solid formula ensures strong pigment density
- Resistant to drips in adverse weather
- Extremely fast drying time for efficient work
Cons
- High-pressure output may be difficult for beginners to control
- Limited line width versatility without aftermarket caps
- Requires proper ventilation due to industrial-strength formulation
Setup, Compatibility & Care
Before use, ensure the can is at room temperature and shake vigorously for at least two to three minutes to ensure the pigments are thoroughly mixed. Always test the spray on a piece of scrap material to gauge the pressure. Store the cans in a cool, dry place away from direct sunlight or extreme heat. To maintain the life of the nozzle, always invert the can after use and spray for a few seconds until the mist runs clear; this prevents the paint from drying inside the valve and clogging the mechanism.