KOBRA High Pressure Spray Paint 400ml - Purple
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The KOBRA High Pressure Spray Paint in Purple is a professional-grade, 100% acrylic aerosol designed for artists, crafters, and DIY enthusiasts who demand total surface coverage and reliability. Its high solid content and thixotropic, non-drip formula ensure consistent, fast-drying results even in challenging weather conditions, though users should note that the included Outline Cap is specifically calibrated for medium-width application rather than fine detailing.
All features
| Colour | Purple |
|---|---|
| Model Part Number | KOB-10065 |
| Brand | KOBRA |
Extended Product Information
FAQs
Can I use this paint on plastic surfaces?
Yes, the 100% acrylic formula is suitable for most surfaces, though light sanding of glossy plastic is recommended for better adhesion.
What is the width of the spray line?
The included Outline Cap provides a medium line that is approximately 25-35mm wide.
Does this paint work in cold weather?
Yes, the KOBRA HP formula is designed for stability under extreme weather conditions, including cold temperatures.
Is this a matte or glossy finish?
KOBRA HP typically provides a vibrant, solid finish, though the exact sheen can vary based on the specific color and surface type.
How do I ensure the nozzle doesn't clog after use?
Always turn the can upside down and spray for a few seconds until the output is clear after every use.
Can I swap the nozzle for a different width?
Yes, the valve system is compatible with most standard professional-grade spray paint caps.
Troubleshooting
The spray is dripping or running on the surface
Reduce your application speed or increase the distance between the can and the surface.
The nozzle is clogged or producing a spluttering spray
Remove the cap and soak it in a solvent like acetone or thinners, or replace it with a fresh cap.
The paint is not adhering properly
Ensure the surface is completely degreased and sanded if necessary; moisture or oil residue will inhibit proper bonding.
Pros and Cons
Pros
- Excellent opaque coverage on multiple surfaces
- Non-drip formula simplifies application for beginners and pros
- Rapid drying speed increases productivity
- Highly reliable in various weather environments
Cons
- Included cap may be too wide for fine-line artistic detailing
- High pressure output requires practice to control flow
- Requires proper ventilation due to aerosol properties
Setup, Compatibility & Care
To ensure optimal performance, shake the aerosol can vigorously for at least two minutes until the internal mixing ball moves freely. Always test your spray technique on a scrap piece of material before beginning your main project. Ensure the target surface is clean, dry, and free of grease or dust for maximum adhesion.
After application, clear the nozzle by turning the can upside down and spraying for several seconds until only clear propellant emerges; this prevents the paint from drying inside the cap and clogging the valve. Store cans in a cool, dry place away from direct sunlight and temperatures exceeding 50 degrees Celsius.