KOBRA Binary HP3050 Aerosol Spray Paint 400ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The KOBRA Binary HP3050 Aerosol Spray Paint is designed for professional artists and muralists who require a high-pressure, high-output solution for large-scale projects. Featuring a 100% acrylic thixotropic formula, this 400ml paint offers exceptional covering power and rapid drying times, ensuring consistent application without drips. While it excels in extreme weather conditions, the high-pressure output requires a steady hand and practice to achieve precise control for intricate details.
All features
| Colour | Grey |
|---|---|
| Model Part Number | KOB-10091 |
| Brand | KOBRA |
Extended Product Information
FAQs
Can I use this paint indoors?
While it can be used indoors, always ensure the area is well-ventilated and wear appropriate respiratory protection due to the high-pressure aerosol output.
Is this paint UV resistant?
Yes, the 100% acrylic formula is formulated for outdoor use and offers good resistance to fading.
Are other spray caps compatible with this can?
Yes, the KOBRA Binary HP3050 is designed for versatility and is compatible with most standard professional female-valve spray caps.
Does this paint require a primer?
While it has excellent adherence on most surfaces, using a primer is recommended on non-porous or very smooth surfaces for optimal long-term results.
What is the primary benefit of a 'thixotropic' formula?
It means the paint is viscous when at rest but becomes thinner when sprayed, which helps it adhere immediately to the wall without dripping.
Troubleshooting
Spray nozzle becomes clogged
Remove the cap and soak it in a solvent cleaner or acetone. Replace with a new cap if blockage persists.
Paint is dripping or running
You are likely holding the can too close or moving too slowly. Increase your distance from the surface and maintain a consistent, faster sweeping motion.
Uneven or blotchy finish
Ensure the can is shaken thoroughly for at least two minutes before starting, and overlap each stroke by approximately 50%.
Pros and Cons
Pros
- Excellent opacity and covering power on most surfaces
- Reliable performance in extreme weather conditions
- Includes a high-quality Outline Cap for standard line work
- Compatible with a wide range of top-coat varnishes
- Thixotropic design prevents messy drips
Cons
- High pressure may be difficult for beginners to control
- Limited to specific line width provided by the included cap
- Not intended for fine, micro-detail work
Setup, Compatibility & Care
To ensure the best results, shake the can vigorously for at least two minutes before use to ensure the pigments and propellants are thoroughly mixed. Always perform a test spray on a scrap piece of cardboard to ensure the flow is consistent before starting your project. For best adhesion, ensure the target surface is clean, dry, and free of dust or oils. When switching between tasks, hold the can upside down and spray briefly to clear the nozzle and prevent clogging. Store the product in a cool, dry place away from direct sunlight and extreme heat to maintain the integrity of the acrylic formula.