Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
Hammerite Direct to Rust Smooth Metal Paint is designed for homeowners and DIY enthusiasts looking to restore and protect metal surfaces such as gates, railings, and garden furniture. Its primary benefit is the 2-in-1 formula that acts as both primer and topcoat, allowing you to paint directly over rust for a high-sheen, long-lasting finish that offers up to 8 years of weather protection. One key caveat is that this is a solvent-based product specifically engineered for exterior use, meaning it requires proper ventilation and is not suitable for indoor applications.
| Colour | Silver |
|---|---|
| Model Part Number | 5084897 |
| Brand | Hammerite |
No, this product is solvent-based and specifically formulated for exterior use.
No, this is a 2-in-1 paint and primer, so it can be applied directly to rust after removing any loose debris.
You should wait at least 4 hours before applying a second coat.
For bare galvanized surfaces, you must use a specialized primer like Hammerite Special Metals Primer first.
Use Hammerite Brush Cleaner & Thinners to clean your brushes after removing as much excess paint as possible.
The paint offers a surface coverage of approximately 5 square metres per litre.
You are likely applying too much paint at once. Use thinner, even coats and ensure the surface is properly prepped.
This often occurs when painting over incompatible existing finishes. Always perform a small test patch before full application. If reaction occurs, remove the old paint entirely.
Check the ambient temperature; avoid painting in extremes of temperature or high humidity.
For optimal results, ensure the ambient temperature is between 8°C and 25°C during application. While it applies directly to most metals, bare zinc, aluminum, or galvanized surfaces require a specialized primer beforehand.
