Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Cuprinol Ducksback Shed and Fence Treatment in Silver is designed for homeowners and gardeners seeking to protect and transform their rough-sawn outdoor timbers. This wax-enriched solution not only imparts a modern silver colour but also provides robust weatherproofing, extending the lifespan of fences, sheds, trellises, and pergolas. While offering quick drying times and superior water repellency, its specific formulation means it's best suited for rough-sawn surfaces, ensuring optimal performance and aesthetic results.
| Colour | Silver |
|---|---|
| Model Part Number | 5095343 |
| Brand | Cuprinol |
No, this product is specifically formulated for rough-sawn timber. Using it on smooth wood may result in poor absorption and an uneven finish.
For optimal colour depth and long-lasting weather protection, we generally recommend applying two coats, allowing adequate drying time between applications.
It becomes showerproof in just 1 hour and is fully dry within 2 to 4 hours under normal weather conditions (moderate temperature and humidity).
You can apply Cuprinol Ducksback using a brush or a suitable garden sprayer. Ensure you achieve an even coverage, working along the grain of the wood.
Yes, for the best results, ensure the timber is clean, dry, and free from any loose material, dirt, or flaking paint or stain. This allows for proper absorption.
No, Cuprinol Ducksback is not designed for decking. Decking typically requires specialized treatments that can withstand foot traffic and offer different protective qualities.
Info needed: [Specific coverage rate per litre]. As a general guide, 5L typically covers approximately 20-30 square meters with two coats, but always refer to the specific product packaging for exact coverage rates.
It is always recommended to keep pets and plants away from the treated area until the product has completely dried. Always refer to the safety instructions on the product packaging for detailed guidance.
Ensure the timber surface was uniformly clean and dry before applying. Apply the product consistently and avoid over-brushing. Due to varying absorbency in rough-sawn timber, slight variations can occur. A second coat often helps to even out the finish.
Verify that two coats were applied as recommended for optimal performance. Ensure the product was thoroughly stirred before and during use. Extremely porous timber might benefit from an additional coat or more thorough surface preparation.
Drying times are highly dependent on environmental conditions, including temperature and humidity. Apply the treatment in dry, mild weather conditions. Ensure good air circulation around the treated area and apply thin, even coats rather than very thick ones.
Cuprinol Ducksback is designed to absorb into rough-sawn timber rather than form a thick film, making peeling uncommon. Ensure the surface was free of previous coatings that could interfere with absorption. Clean and properly prepare the surface according to instructions before application.
