Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners and DIY enthusiasts looking to protect and enhance their exterior wooden structures like sheds and fences. The Cuprinol 5 Year Ducksback offers a durable, weather-resistant coating and a stylish Herring Grey finish, promising up to 5 years of protection. While highly effective, ensure your wood surface is clean and dry for optimal adhesion and longevity.
| Colour | Grey |
|---|---|
| Model Part Number | 5701422 |
| Brand | Cuprinol |
A 5L tin of Cuprinol Ducksback generally covers a standard garden shed or several fence panels with two coats. Coverage is approximate and depends on the porosity and size of the wood. Always measure your area and refer to the `Info needed: [specific coverage rate]` on the product label for precise calculation.
No, Cuprinol Ducksback is specifically formulated for sheds and fences. It is not recommended for decking or other high-traffic areas, as it does not provide the appropriate slip resistance or durability required for foot traffic. Please use a product specifically designed for decking.
Cuprinol Ducksback is quick-drying. It is typically touch dry within `Info needed: [specific touch dry time]` hours, and you can usually apply the next coat after `Info needed: [specific recoat time]` hours, depending on ambient temperature and humidity. Always check the specific drying instructions on the product label.
Yes, once the paint is fully dry, it has a low odour and is formulated to be safe for plants and pets in the surrounding environment. During application, avoid direct contact with plants and animals.
No, Cuprinol Ducksback is an all-in-one decorative and protective treatment, so a separate primer or base coat is generally not required for bare or previously treated sheds and fences, provided the surface is clean, dry, and sound.
It can be applied over most existing water-based shed and fence treatments. If the existing finish is oil-based or glossy, ensure the surface is thoroughly cleaned, dry, and any loose material is removed. For best adhesion, lightly sanding smooth, previously coated surfaces is recommended.
Herring Grey offers a modern, subtle grey finish that is designed to provide a contemporary aesthetic to your garden sheds and fences. It's a popular choice for achieving a clean, sophisticated look in outdoor spaces.
Ensure the wood surface was thoroughly cleaned, completely dry, and free from loose material (e.g., old paint, dirt, mould) before application. Any previous oil-based treatments or sealants can also affect adhesion. Lightly sand the affected area and reapply after proper surface preparation.
Always stir the paint thoroughly both before and during application to ensure that pigments are evenly distributed. Apply thin, even coats, and allow adequate drying time between each coat. Very porous wood might require an additional coat to achieve a consistent finish.
This often occurs from applying too much paint in a single coat or overloading the brush. Apply thinner, more controlled coats, and ensure you brush out any excess paint or drips immediately as they appear. The non-drip formula helps, but careful application is still key.
