ADATA LANCER BLADE RGB DDR5 - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The ADATA LANCER BLADE RGB DDR5 is designed for PC builders seeking high-performance DDR5 memory with customizable aesthetics. Its key benefit is delivering 6000 MHz speed with low latency in a compact form factor, ideal for builds with limited space or specific cooler clearances. A potential caveat is the RGB software's compatibility, requiring careful management to avoid conflicts with motherboard software.
All features
| Colour | Black |
|---|---|
| Series | LANCER BLADE RGB DDR5 |
| Model Part Number | AX5U6000C3016G-SLABRBK |
| Brand | ADATA |
Extended Product Information
FAQs
What is the primary benefit of DDR5 memory over DDR4?
DDR5 offers significantly higher bandwidth, improved power efficiency, and enhanced features like On-die ECC for greater stability compared to DDR4.
How do I enable XMP or EXPO for overclocking?
You need to enter your computer's BIOS/UEFI settings during boot-up (usually by pressing DEL or F2). Look for memory settings and enable the XMP (for Intel) or EXPO (for AMD) profile. Save changes and exit.
Can I mix this LANCER BLADE RGB module with other RAM modules?
It is highly recommended to use identical modules for optimal performance and stability, especially if aiming for dual-channel mode. Mixing different speeds, timings, or brands can lead to compatibility issues or reduced performance.
What happens if I use multiple RGB control software programs?
Using multiple RGB control software from different manufacturers (e.g., XPG Prime and MSI Mystic Light simultaneously) can lead to conflicts, causing lighting effects to freeze, behave erratically, or not function at all. It's best to use one primary control software. If conflicts arise, you may need to uninstall one, reboot, and then reinstall your preferred software. Refer to the product's specific instructions for detailed guidance.
Is this memory compatible with laptops?
No, this is a DIMM module designed for desktop PCs. Laptops typically use smaller SO-DIMM modules.
What is the CAS latency (CL) and why is it important?
CAS latency (CL) is the delay between the memory controller telling the memory module to access a specific column in a row and the data from that column being available. A lower CL number (like 30) means less delay, resulting in faster performance, especially in latency-sensitive applications like gaming.
Does this module have On-die ECC?
Yes, the XPG LANCER BLADE RGB DDR5 features On-die ECC, which helps correct errors internally to improve data integrity and system reliability.
Troubleshooting
System does not boot or memory is not recognized.
Ensure the module is fully seated in the RAM slot. Check your motherboard manual for the correct slot configuration. Try booting with a single module. Verify motherboard compatibility with DDR5 memory and the specific speed (6000 MHz).
System instability or frequent crashes.
If overclocked, revert to default speeds or try a slightly lower frequency. Ensure adequate power supply to the system. Check for overheating. Run a memory diagnostic tool to test for errors.
RGB lighting not working or inconsistent.
Ensure the XPG Prime software or your motherboard's RGB control software is installed and running. Close any other conflicting RGB control software. Update your motherboard's BIOS and RGB software. Check connections if applicable (though this is a module-based feature).
Poor performance compared to expected speeds.
Verify that XMP or EXPO is enabled in the BIOS/UEFI. Ensure the memory is running at the advertised speed (6000 MHz) and not a default JEDEC speed. Check that the module is in the correct slot for dual-channel operation if using multiple sticks.
Pros and Cons
Pros
- High performance with 6000 MHz speed and CL30 latency.
- Compact, low-profile design is ideal for small form factor builds and avoids cooler obstruction.
- Vibrant and customizable RGB lighting effects.
- Enhanced power efficiency and stability with PMIC and On-die ECC.
- Easy overclocking with XMP 3.0 and AMD EXPO support.
Cons
- RGB software can sometimes conflict with motherboard lighting control software.
- As a single 16GB module, it may not be ideal for dual-channel configurations without purchasing a second identical module.
- The specific benefits of DDR5 are most pronounced on compatible platforms.
- Requires a motherboard that supports DDR5 memory.
Setup, Compatibility & Care
Setup:
- Ensure your motherboard supports DDR5 memory.
- Power off your computer and unplug the power cord.
- Open your computer case.
- Locate the RAM slots on your motherboard. Refer to your motherboard manual for correct slot placement, especially for optimal performance (e.g., dual-channel configuration if using multiple sticks).
- Carefully insert the LANCER BLADE RGB module into the designated slot, ensuring the notch on the module aligns with the notch in the slot. Apply even pressure until the clips on both sides snap into place.
- Close your computer case, reconnect the power cord, and power on your system.
- For overclocking, access your system's BIOS/UEFI and enable Intel XMP 3.0 or AMD EXPO.
Compatibility:
- This memory module is compatible with motherboards supporting DDR5 RAM and either Intel XMP 3.0 or AMD EXPO profiles. Check your motherboard's specifications for supported memory types and speeds.
- For RGB control, it is compatible with XPG Prime software and major motherboard RGB control software (ASUS Aura Sync, ASRock Polychrome SYNC, Gigabyte RGB Fusion, MSI Mystic Light). Note potential conflicts when using multiple RGB control software; refer to FAQs for guidance.
Care:
- Avoid touching the gold contacts on the memory module; handle by the edges.
- Ensure proper airflow within your PC case to keep the heatsink cool during operation.
- Clean dust from the heatsink and surrounding components periodically using compressed air. Do not use liquids or abrasive cleaners.