XPG LANCER BLADE RGB DDR5 - 32 GB - 6000 MHz
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This ADATA LANCER BLADE RGB DDR5 memory kit is designed for PC enthusiasts and gamers seeking high-performance DDR5 RAM. It offers a significant boost in speed and responsiveness with its 6000 MHz clock speed and 32GB capacity (2x16GB), ideal for demanding applications and gaming. A potential caveat for some users is the requirement to manage RGB software carefully to avoid conflicts.
All features
| Colour | Multicolor |
|---|---|
| Series | LANCER BLADE RGB DDR5 |
| Model Part Number | AX5U6000C3016G-DTLABRWH |
| Brand | ADATA |
Extended Product Information
FAQs
What is the primary benefit of DDR5 memory?
DDR5 memory offers significantly higher bandwidth, faster clock speeds, and improved power efficiency compared to DDR4, leading to better overall system performance, especially in demanding applications and gaming.
How do I enable RGB lighting effects?
RGB lighting can be controlled through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) or XPG's Prime software. Ensure you are using only one compatible software to avoid conflicts.
Is this memory compatible with my AMD Ryzen system?
Yes, this module supports AMD EXPO (EXtended Profiles for Overclocking), which helps in easily enabling performance profiles on compatible AMD platforms. Always check your motherboard's QVL for specific compatibility.
What does ECC mean and why is it important?
ECC stands for Error-Correcting Code. On-die ECC helps detect and correct single-bit errors in real-time, enhancing data integrity and system stability, particularly crucial for critical tasks and long operating sessions.
Can I mix these modules with other RAM kits?
It is generally recommended to use modules from the same kit to ensure compatibility and optimal performance. Mixing different RAM kits, even of the same type, can sometimes lead to instability or reduced speeds.
What is the CAS latency (CL) and how does it affect performance?
CAS latency (CL) is the number of clock cycles it takes for the memory to respond to a request for data. A lower CL value (like 30) generally means faster response times, contributing to better performance. It should be considered alongside the memory clock speed.
How do I update the firmware for the RGB lighting?
Firmware updates for RGB lighting are typically handled through the respective RGB control software (motherboard vendor software or XPG Prime). Check the software's settings or support section for available updates.
Troubleshooting
System does not boot or display after installation
Ensure modules are fully seated in the correct DIMM slots. Verify motherboard and CPU compatibility with DDR5. Try booting with a single module to identify a potentially faulty stick. Reset BIOS settings to default.
RGB lighting not working or showing incorrect colors
Verify that the RGB control software is installed correctly and compatible with your motherboard. Ensure no other RGB software is running simultaneously, as this can cause conflicts. Restart the RGB control software or your PC. Check XPG Prime software instructions for managing conflicts.
System instability or random crashes
Ensure XMP/EXPO profiles are correctly enabled in BIOS. If overclocking manually, try reducing the frequency or increasing voltage slightly. Run memory diagnostic tools like MemTest86 to check for errors. Ensure adequate system cooling.
One or more memory modules not detected
Check module seating in the DIMM slots. Verify motherboard RAM compatibility and maximum supported speed/capacity. Test each module individually in different slots.
Pros and Cons
Pros
- High-speed 6000 MHz DDR5 performance for demanding tasks.
- Low-profile heatsink design for compatibility with various PC builds.
- Customizable RGB lighting with multiple control options.
- Improved power efficiency and stability with PMIC.
- Enhanced data reliability through On-die ECC.
Cons
- RGB software conflicts can occur if not managed properly.
- Higher cost typical of DDR5 memory compared to DDR4.
- Requires a compatible DDR5 motherboard and CPU.
Setup, Compatibility & Care
Setup: Ensure your motherboard supports DDR5 memory. Install the modules into the designated DIMM slots as per your motherboard manual. For enhanced performance and RGB customization, it is recommended to enable Intel XMP 3.0 or AMD EXPO profiles in your system's BIOS.
Compatibility: This memory is compatible with PCs featuring DDR5 memory support. Check your motherboard's Qualified Vendor List (QVL) for guaranteed compatibility. For RGB control, ensure compatibility with your motherboard's RGB software. If using XPG Prime software, be aware of potential conflicts and follow the provided instructions to close other RGB control software.
Care: Keep the memory modules clean by avoiding direct contact with the chips and connectors. Use a can of compressed air to remove dust from the heatsink and PCB. Avoid exposing the modules to extreme temperatures or excessive moisture. For RGB functionality, ensure proper software installation and management.