Fusion Mineral Paint - 500 ml - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Fusion Mineral Paint in Green is an ideal choice for DIY enthusiasts and furniture restoration professionals looking for a high-performance, long-lasting finish. This 500 ml container offers excellent coverage and durability, making it perfect for upcycling projects, though users should be prepared for its specific drying time and surface preparation requirements to achieve the best results.
All features
| Colour | Green |
|---|---|
| Brand | Fusion Mineral Paint |
Extended Product Information
FAQs
Do I need to sand my furniture before using Fusion Mineral Paint?
While the paint has excellent adhesion, a light sanding is always recommended on glossy surfaces to ensure the best possible bond.
Does this paint require a wax or sealer?
No, Fusion Mineral Paint has a built-in topcoat, so it does not strictly require an additional wax or sealer for durability.
How many square feet will 500 ml cover?
A 500 ml container typically covers approximately 75 square feet, depending on the porosity of the surface.
Can I use this paint outdoors?
Yes, it is durable enough for outdoor furniture, provided the piece is not in direct contact with standing water.
How long should I wait between coats?
Wait at least two hours between coats, though this can vary based on ambient humidity and temperature.
Troubleshooting
Paint is peeling shortly after application
This usually indicates the surface was not properly cleaned of wax, oil, or grease before painting. Sand the area, clean with a degreaser, and reapply.
Visible brush strokes remain after drying
Try using a high-quality synthetic bristle brush and applying thinner coats. A light sanding with fine-grit paper between coats can also smooth out imperfections.
Paint is not curing hard
High humidity or cold temperatures can significantly increase cure time. Ensure the room is dry and warm to allow the water to evaporate properly.
Pros and Cons
Pros
- High pigment density for superior coverage
- Durable finish suitable for high-traffic furniture
- Environmentally friendly and low-VOC
- Easy to clean up with soap and water
Cons
- Requires careful surface preparation for adhesion
- 500 ml size may be insufficient for large furniture pieces
- Specific drying intervals must be followed for optimal curing
Setup, Compatibility & Care
Setup
Ensure your workspace is well-ventilated and the ambient temperature is between 15°C and 25°C. Stir the paint thoroughly before use, especially since pigments can settle at the bottom of the container.
Compatibility
This paint works best on wood, metal, and previously painted furniture. For glossy or non-porous surfaces, a light sanding is recommended to increase mechanical adhesion.
Care
Once fully cured (typically 21 days), the finish is highly resistant to spills and scratches. For daily cleaning, use a soft, damp cloth. Avoid harsh chemical cleaners or abrasive scouring pads, as these can dull the matte finish.