Fusion Mineral Paint - Beige
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Fusion Mineral Paint in Beige is an ideal choice for DIY enthusiasts and professional furniture restorers looking for a high-quality, durable finish on home decor projects. This professional-grade paint provides excellent coverage and a smooth application, making it perfect for transforming old furniture or crafting new decorative pieces. While it offers a long-lasting and resilient result, users should ensure proper surface preparation, such as cleaning and light sanding, to achieve optimal adhesion and the most professional appearance.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 0306603 |
| Brand | Fusion Mineral Paint |
Extended Product Information
FAQs
Do I need to apply a primer before using Fusion Mineral Paint?
In most cases, no. Fusion is designed to be a self-leveling, high-adhesion paint. However, for surfaces that are very slick or have potential bleed-through, a primer is recommended.
How many coats should I apply?
While it offers excellent coverage, two coats are generally recommended to achieve the most durable finish and uniform color depth.
Can I use this on outdoor furniture?
It is primarily designed for indoor use. If using outdoors, ensure the piece is protected from direct elements or apply a compatible exterior-grade topcoat.
How long does it take to cure?
The paint is dry to the touch in about 2 hours, but it takes approximately 21 days to fully cure and reach maximum hardness.
Is this paint safe for children's furniture?
Fusion Mineral Paint is formulated to be low VOC, making it a popular choice for home decor, but always ensure the paint is fully cured before allowing children to use the furniture.
Troubleshooting
Paint is chipping or peeling after drying
The surface was likely not cleaned of grease or wax. Sand the area, clean with a degreaser, and reapply.
Visible brush strokes
Thin the paint slightly with a small amount of water or use a high-quality synthetic brush with softer bristles.
Paint not adhering to surface
The surface may be too slick. Perform a light scuff-sand with fine-grit sandpaper to provide a surface for the paint to bond to.
Pros and Cons
Pros
- High durability for high-traffic furniture
- Excellent opacity and coverage
- Smooth, professional finish with minimal effort
- Versatile application across different material types
- Easy to clean up with water
Cons
- Requires proper surface preparation for best results
- Longer curing time compared to standard latex paints
- Not suitable for outdoor surfaces without additional topcoat
Setup, Compatibility & Care
To get the best results, start by cleaning your piece with a degreaser to remove wax, oils, or dust. If the surface is glossy, lightly scuff-sand with 220-grit sandpaper to create a profile for the paint to grip. Apply using a high-quality synthetic brush or a microfiber roller for a smooth finish. While the paint is touch-dry in about two hours, it requires a curing time of up to 21 days to reach its full hardness. During this curing phase, treat the painted surface gently. For long-term care, simply wipe with a damp cloth; avoid harsh chemical cleaners which can degrade the finish over time. This paint is compatible with many standard water-based sealers if extra protection is needed for high-use tabletops.