Shopping.co.uk

Rustins Quick Dry Metal Paint - Black Iron - 500ml

Not AvailableRustins Quick Dry Metal Paint - Black Iron - 500ml
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available

A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cas...

Currently unavailable

Colour
BlackGoldGreenSilverWhite

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide helps you get the most out of Rustins Quick Dry Metal Paint (Black Iron). Designed for both interior and exterior metal surfaces, it's ideal for those seeking a durable, quick-drying, and easy-to-apply paint without the need for a primer. This water-based formula provides a smooth satin finish and contains anti-corrosion additives. However, it is not suitable for use under cellulose finishes.

All features

ColourBlack
Model Part NumberMPBK500
BrandRustins

Extended Product Information

FAQs

Do I need to use a primer?

No, Rustins Quick Dry Metal Paint can be applied directly to bare metal, cast iron, and galvanised metal without a primer.

How long does it take for the paint to dry?

The paint is touch-dry in approximately 30 minutes and recoatable in 2 hours.

Can I use this paint outdoors?

Yes, Rustins Quick Dry Metal Paint is suitable for both interior and exterior use.

How many coats of paint should I apply?

For adequate coverage, apply two coats. A third coat is recommended for improved durability.

What surfaces can I apply this paint to?

This paint is suitable for bare metal, cast iron, and galvanised metal.

How do I clean the paint brushes after use?

Clean brushes and rollers immediately after use with water.

What is the coverage per litre?

The coverage is up to 14m² per litre.

Is this paint suitable for use under cellulose finishes?

No, it is not suitable for use under cellulose finishes.

Troubleshooting

Paint is not drying properly.

Ensure adequate ventilation. Check the temperature and humidity levels, as these can affect drying times. Ensure the surface is clean and free of contaminants before application.

Paint finish is not smooth.

Prepare the surface properly by sanding and cleaning. Apply thin, even coats of paint, avoiding over application.

Paint is peeling or flaking.

Ensure the surface is properly prepared, remove any existing loose paint and rust. Apply the paint according to the instructions, and allow the paint to fully cure.

Coverage is less than expected.

Ensure you are applying the paint at the recommended thickness. Consider a third coat for increased coverage and durability. Ensure the surface is non-porous.

Pros and Cons

Pros

  • Quick drying time allows for faster project completion.
  • Eliminates the need for a primer, reducing prep work.
  • Suitable for both indoor and outdoor use.
  • Provides a durable and attractive satin finish.
  • Low-odour and easy cleanup with water.
  • Contains anti-corrosion additives, protecting metal surfaces.

Cons

  • Not suitable for use under cellulose finishes.
  • Requires multiple coats for optimal durability.
  • Specific colour availability may vary.
  • Coverage can be affected by the surface and application method.
  • Surface preparation is still needed to achieve best results.
  • May require more coats to achieve the desired finish compared to some other paint types.

Setup, Compatibility & Care

Setup

  1. Surface Preparation: Clean the metal surface thoroughly to remove any rust, dirt, grease, or loose paint. Use a wire brush or sandpaper to prepare the surface.
  2. Application: Stir the paint well before use. Apply the paint directly to the metal using a brush or roller. For best results, apply two coats, allowing each coat to dry completely before applying the next.
  3. Drying Time: The paint is touch-dry in approximately 30 minutes and recoatable in 2 hours. However, drying times can vary depending on temperature and humidity.
  4. Cleaning: Clean brushes and rollers immediately after use with water.

Compatibility

  • Suitable for use on bare metal, cast iron, and galvanised metal.
  • Water-based, so compatible with water-based primers if desired, but a primer is not needed.
  • Not compatible for use under cellulose finishes.

Care

  • Clean the painted surface with a damp cloth and mild detergent as needed.
  • Avoid using abrasive cleaners or solvents.
  • Inspect the painted surface regularly for any signs of damage or wear, and reapply paint as needed.